Voigtländer Bessa 66

This is a medium format folder from the German firm of Voigtländer. It dates from between 1938 and 1940. This model was also made after WWII from 1946 to 1950, but my camera is a very early model - more later. There was also a cheaper version available with a folding viewfinder and no automatic framing.  It is extremely similar to the later Perkeo that replaced it in 1950.

Voigtländer Bessa 66 (C) John Margetts

This camera has a lot of 'modern' features that make it stand out from earlier folding cameras. These include a body shutter release and automatic frame advance - no need to look in the red window when advancing the film, the camera spaces the film automatically (more or less, it does not work too well on my camera. I used the red window).

First, a basic description.  The camera measures 125 mm wide by 40 mm thick and 80 mm high when folded and 95 mm thick when open. This is very much a pocket camera even if the pocket needs to be robust enough to take the weight - 524 g without a film. As standard, the top plate is uncluttered. It is made from chrome plated brass  and has a reverse-Galilean viewfinder right at the right-hand end. On the opposite end is the film advance knob. Close to the advance knob is a frame counter - one of the 'modern' features I mentioned. That should be all that is on the top plate but a previous owner has glued an accessory shoe on using a large amount of epoxy glue.  Close to the rewind knob, on both the front and back faces of the top plate are two sliders. Without an instruction manual, it is not clear what these do. The one on the front clearly advances the frame counter and seems to free the advance system to allow the film to be advanced. When the film moves through the camera, a feeler shaft rotates and this serves to measure the amount of film that has moved and the film advance locks when one frame (62 mm) has moved. There is no clear use for the rear slider but I think it might have to do with setting the start of the film once the red window has been used to line up the first frame. I would welcome advice here from anyone who has a better knowledge of this camera. This system only works sporadically with my camera and when using the test film I relied on the red window for all frames.

As this is a folding camera, the lens is hidden behind a door that must be opened before using the camera. This is achieved with a button the the base. Pressing this causes the door to spring most of the way open - it might well have opened completely when new. When open, it locks the lens/shutter firmly in place. To close the lens door again, there is a chrome bar beneath the lens which must be firmly pressed to unlock the struts holding the door in place. 

As supplied new, this camera came with a hinged yellow filter ('Moment' filter) but this has long since broken off as is usual for cameras of this age. Also as a consequence of age, the bezel around the lens has come loose and fallen off (it was glued in place). This means I have no lens name or focal length information but I can gather this from information from the interweb. The lens has a serial number (located inside the camera on the rear of the lens). The pre-war versions of this camera were supplied with either a  three element Voigtar or four element Skopar lens. Of these, only the Skopar had a serial number so mine must be a Skopar lens. It is a 75 cm focal length lens (as was the Voigtar option) with a maximum aperture of f/3.5. The shortest marked focussing distance is 1 m, but the lens will move significantly further than this so the closest focus is going to be nearer to 0.7 m at a guess. The lens is not colour corrected (that would be a Color-Skopar) and is not coated but performed well regardless.

The shutter is a Compur shutter with a serial number of 3 751 602 - my records tell me that this dates from between 1935 and 1939. The lens serial number is 2 245 637 and this dates from between 1937 and 1942. (The range of dates is so vague because both Compur and Voigtlander lost most of their records in the destruction of WWII.) I have a piece of further dating information in that the slider on the front of the top plate was removed in 1939 so my camera must be from 1938 or early 1939.

The Compur shutter has a fastest speed of 1/300 seconds (later models had a Compur-Rapid shutter with a nominal 1/500 second speed) and apertures from f/3.5 to f/16. Both of these are very usable in 2015 with modern film. What is missing from this shutter is a delay timer and any flash connectors. For my test film, I used Kodak Portra 160 ISO film in sunny weather in April and shot most of the film at either 1/100 or 1/300 and f/11 or f/16. As is usual for this date, the shutter needs cocking before use. While the primary shutter release is on the shutter housing, the actual release is a lever that protrudes through the lens door. This is strictly left-handed in use, leaving your right hand to have a firm grasp of the camera.  Exacta did things the same way.

The base plate has three items. On the left is a lever with two functions. In the closed position, it prevents the back being opened and when swung out, it acts as a foot to allow the camera to be securely placed on a flat surface for longer exposures (together with a cable release, which the shutter is threaded for). There is no delay timer, so no selfies with this camera. In the centre of this lever is a tripod boss. This is a 3/8 inch Whitworth socket with a 1/4 inch Whitworth insert.  At the other end of the top plate is a depth of field calculator. You rotate the disc to set the distance you are focussing at to the pointer and then read off the depth of field against the aperture you are using.  The third item on the base plate is the release for the lens door.

In use, this is a simple, easy camera to use. The hardest part is the viewfinder which, as was normal in its day, is rather small and not usable while wearing glasses. With the left-hand shutter release, you can get a really good grip on the camera while actuating the shutter release with your left index finger. It is easy to cock the shutter with your right hand while still gripping the camera. 

The hardest part is reading the numbers on the shutter speed, aperture and focus scales. They are rather small for my ageing eyes.

As is common of Voigtländer cameras, there are Happy Snapper settings on the lens. These are marked by a small triangle and a small circle. If you set the focus to the triangle and the aperture to f/8 then all between 2.5 m and 5 m will be in focus (ideal for portraits) and if you set the focus to the small circle, and the aperture to f/8 then all between 5 m and infinity will be in focus (ideal for landscapes).

Even though the lens is neither colour corrected nor coated, it has performed well. There is no visible colour fringing (the panchromatic films in use in the 1930s would have needed well corrected lenses) nor is there any significant flare visible in my test pictures. Where I have shot Contra Jour, there is some slight evidence of flare but it is very minor. I have much worse lenses in my collection.

The film I used for my test was Kodak Portra 160, developed and scanned by Snappy Snaps in Lincoln.  Loading the film is easy - both spool holders are hinged. The camera takes either 120 or 620 film (only 120 is currently available). The dark bar along the right-hand edge of some frames is a scanning artefact, not the camera.

Shot into the light - some flare on the right-hand edge

Voigtlander Vitoret 110

Voigtlander Vitoret 110, front view

I am not entirely sure why I bought this camera. The original thought came when I saw some Lomography 110 cartridges for sale in Snappy Snaps in Lincoln. When I saw this camera for sale on Ebay, I found myself bidding.  I was the only bidder and I got the camera for £1.00 plus postage.

It is not a complicated camera. It is a black box measuring 120 mm by 25 mm by 35 mm. The lens and viewfinder (both front and back) are covered by shutters when the camera is not in use. The camera is opened by moving the film advance slider. The shutter button is on top (it is coloured grey) and the film advance (also grey) is below it. If you hold the camera in a pinch grip with your right hand, your forefinger will land on the shutter button and your thumb on the film advance slider.  I don't think you could use this camera one handed as the camera needs to be steadied when winding on the film.

The lens is a Lanthar f5.6 lens - Lanthar lenses are triplets. There is no indication on the camera as to focal length but a search on Google tells me it is 24 mm - this is slightly wide for 16 mm film (normal would be about 26 mm) which is what we would expect for a point-and-shoot camera.

Vitoret 110, rear view

The viewfinder is a reverse Galilean finder (as was usual on consumer cameras by the 1970s)  and is quite large and bright with bright lines for framing - complete with close-up markings. The iris diaphragm is essentially square - so the bokeh will not be spectacular. The aperture can be altered but only by selecting weather icons. The pictorial instructions give f-numbers for these icons - sunny is f16, dull is between f11 and f8, light cloud is f5.6 all at speed 1/125 and dull cloud is f5.6 and speed 1/60.
--------------------------------------------------------------------------------------------------------------------------------
Blog copyright by John Margetts, 2014
---------------------------------------------------------------------------------------------------------------------------------

This camera uses the 110 film cartridges which just drop into the camera - no need to connect the film to the take-up spool. Opening the camera to insert the film cartridge is not obvious. You need to press a small grey button and slightly move the end of the camera (it only moves 2 mm or so) and then lift up the back.

Using the camera is very easy, there only being three controls: shutter button, advance slider and weather selector. Opening the lens/viewfinder shutters winds on the film. This means it is important not to wind on the film if you are going to put the camera away as when you next use the camera you will waste one frame. I found I kept forgetting to alter the weather selector, but as the light was only varying between sunny and dull I am expecting the latitude of the film to cope. Actually, this raises another point. the instructions mention using 80 ASA film (or 80 ISO for modern films) but the film I am using is 200 ISO which is more than twice as fast. it remains to be seen as to what exactly this means for my final prints.

Sample pictures:

These are reasonable - particularly if you consider that back in the day, these would have been printed as 5x7 prints at the largest.  Compared to a quality camera and quality film, they are a bit grainy but that is not really a proper comparison.  Biggest fault was my propensity to include a thumb in the right-hand edge of the pictures!

Holkham Hall, Norfolk

Filey, North Yorkshire

Humber bridge

Ropewalk Art Centre, Barton-on-Humber

Horncastle market

Horncastle market + close up of my thumb

Perkeo I

This is a nice, medium format camera from Voigtlander. It is a direct competitor to Zeiss Ikon's Nettar 518/16 - that is, at the lower end of the enthusiasts' 120 cameras - and is a replacement for the Bessa 66. This is a folding camera which fits nicely in a (large-ish) pocket. It measures 125 mm wide x 85 mm high x 40 mm deep (closed) or x 95 mm deep (open). It weighs 483 g. In 1952, Wallace Heaton were advertising this camera at £22/11/6 for the model I have here (that is in old money and equates to £22.57 in new money. That is equivalent to about £1,400 in 2013 values).

Voigtlander Perkeo I

lens: Vaskar

focal length:  75 mm

apertures: f/4.5 to f/16

focus range: 3.5 feet to infinity

lens fitting: fixed

shutter: pronto

speeds: 1/25, 1/50, 1/100, 1/200

flash: F synch only

film size: 120

The lens is a Voigtlander Vaskar - 75 mm focal length and maximum aperture of f/4.5. The Vaskar is Voigtlander's cheaper lens (a more expensive Perkeo I came with a Color-Skopar lens) and has a triplet construction (again, comparable to Zeiss Ikon's Nettar on the 518/16). I have yet to see the result of using this camera, but it has a reputation for having soft focus in the corners. This is not a fatal flaw for me as I have no need for sharp focus in the corners although I am aware that others find this unacceptable.

The shutter is a Gauthier Pronto - four speeds being available of which only 1/100 and 1/200 are of any interest. This shutter has a delayed timer (Vorlaufwerk) which, unusually for a camera of this age, works well. Flash synch is provided for fast flashbulbs - I intend to try this camera with electronic flash to see if this works as well.

The shutter release is standard for the early 1950s - primary release on the shutter housing and a secondary release button on the camera's top plate, linked to the primary release by a lever.  There is also a cable release socket which is between the two - on the hinged door.  The secondary release has a double exposure prevention mechanism fitted requiring the film to be would on before the shutter can be released a second time. On my camera, this does not work very well at the moment. When I had a similar problem on my Franka Solida II, it sorted itself out after a few shots.

--------------------------------------------------------------------------------------------------------------------------------
Blog copyright by John Margetts, 2014
---------------------------------------------------------------------------------------------------------------------------------

Being a folding camera, there needs to be a mechanism to bring the shutter/lens forward, ending with the lens exactly parallel to the film. On my camera this is defective - a small strut has snapped half way along its length. When I received the camera, this folding mechanism barely worked and then very badly - the lens ended up at quite an angle to the film plane.  This needed attention with naphtha to flush out dust and dirt, lubricating with clock oil and repeated folding/unfolding to free up the many joints in the struts.

Perkeo I - folded

It now unfolds easily and seems to put the lens parallel to the film plane, judging entirely by eye. The test film will tell me how parallel things actually are. The broken strut does not seem to matter here. What does not work too well is closing the camera. to close properly, the lens must remain parallel to the camera body otherwise it will not fit into the available space. I suspect that the broken strut is there is achieve this. Without this strut, my thumb has to do its duty. 

As an aside, I have tried a new technique with this camera. When lubricating small parts, it is quite hard to apply a small enough amount of oil to exactly the right place. Getting that small amount of oil into the linkage is a matter of working the linkage and hoping. This time I have diluted the clock oil two parts of oil to one part of naphtha to produce a very runny oil. Because the oil is diluted, once the naphtha has evaporated I am left with 2/3 of the amount of oil I applied. Also, because the oil is now very runny I am hoping that the oil will run between the surfaces of the linkages more easily before the naphtha evaporates to leave a very small amount of oil in place. So far, the only downside I have seen is that the naphtha is very good at wetting surfaces and has carried a small amount of oil over all the surfaces around the linkages. I am not convinced that this is a bad thing.

Perkeo I - showing top plate

Before loading the test film, there are two things I need to do. The first is to use compressed air to blow dust out of the inside. Moving film through a camera generates a small amount of static electricity and this will pull any dust onto the film. After that, I need to check the bellows for light leaks. To do this, I wait until dark (about five PM at the moment) and shine a torch onto the bellows at close quarters. Viewing inside the camera, any light leaks will clearly show.  I have found one very large one. That broken strut I mentioned earlier has scored the bellows material and created a line on pin-pricks. These will need sorting before I try the camera. Otherwise, the camera is good to go.

Voigtlander Vito I

Voigtlander Vito

I have used as a title for this article 'Vito I' but the camera is actually the Vito - Voigtlander were not aware of the forthcoming Vito range at this point.  I already have an article on the Vito II here and much in that article applies here as well.  The two cameras are very similar as you might expect.  The lens serial number says the lens was made in 1945 which is also the probable date of manufacture - one of the first cameras to be made in war-ravished Germany.

lens: Skopar

focal length: 50mm

apertures: 3.5 to 16

focus range: 1 metre to infinity

lens fitting: fixed

shutter: Prontor II

speeds:  1/5 to 1/200

flash: synchronised for bulbs

film size:  35mm

The camera is a folder and nicely compact when closed.  It measures 120mm by 70mm by 40mm closed and 120mm by 70mm by 80mm when open.  Closed, it nicely fits in a trouser or jacket pocket.  The only distinguishing mark on the closed camera is an ornate 'V' on the lens door and a fairly indistinct 'Voigtlander' is embossed on the leatherette on the back together with the model name 'Vito'.  There is also the country of origin embossed on the back which is 'Germany'.  As Germany is the English name for the country this indicates that it is an official import.  Strangely, for an official import, the focussing scale is in metres rather than feet, suggesting that Voigtlander were not fully geared up for export in 1945.

Vito top view

The top plate is very uncluttered.  There is a knurled ring at either end.  The right-hand ring is the film advance and the left-hand ring the rewind.  In the centre of the top plate is a very small, reverse Galilean viewfinder.  The eyepiece is only 5mm by 2.5mm.  The image seen is roughly 0.5 times life size.  This is very small compared to more modern viewfinders but it is more than adequate.  There is also a frame counter which counts up from one.  There is no accessory shoe (flash shoe) although one was available as an extra and fitted over the viewfinder.

On the rear of the top plate is a lever.  In the normal position (down) the film advance will only advance one frame.  When raised, the film can be advanced as far as you want and can be rewound.  The toothed wheel which is exposed by raising the this lever can be used to set the frame number to one.

The underside of the camera contains three items.  Close to the centre is a 3/8 Whitworth tripod boss.  A 1/4 Whitworth insert would have been available for the more usual tripod size.  There is also a button to release the lens door.  This is spring loaded and partially opens the door.  This door never sprung open under its own steam and from new they needed the user to fully open the door once it was released.

The third item on the base is two 'feet'.  These are little more than pins.  A third foot is on the lens door giving three feet altogether which allow the camera to sit stably on a flat surface.  This is primarily intended to allow group portraits using the self-timer.

When the door is opened, the lens comes forward on its bellows and locks in place.  The shutter release is on the top edge of the door together with a threaded socket for a standard cable release.

Vito - lens door open

The lens is a Skopar f3.5, 50mm lens.  This is the original version of the famous Color-Skopar and is not calculated for colour film.  However, it is intended for panchromatic film so should perform well with colour film.  See the test pictures below for details.  This lens focusses from one metre to infinity and has Voigtlander's usual two Happy Snapper settings - a circle for the hyperfocal distance at f5.6 (approximately five metres to infinity at f5.6 or 2.5 metres to infinity at f16) and a triangle which gives a focus range of 2.5 metres to five metres at f5.6 (ideal for groups).  This lens has no blue/purple tinge and so cannot have been coated as was normal post-WWII and so will be liable to flare.

The shutter is a Prontor II (which is the same as a Klio on a Zeiss Ikon camera) which is a pre-war design and was soon to be updated to the Prontor S.  This Prontor II has a PC connector and so must be synchronised for flash - I would suspect for fast flash bulbs (F: sync) but there is no indication of this on the shutter housing (my Vito II has a Pronto shutter and this is specifically marked F:).  Shutter speeds are 1/5, 1/10, 1/25, 1/50, 1/100 and 1/200 which is more than adequate.  The bezel of the shutter housing bears the shutter name - Prontor II - Gauthier's maker logo and Voigtlander's script name.

Vito - lens and shutter

There is a self-timer lever which we are always told not to use on old cameras to prevent damage to the shutter.  It barely works on this camera, taking 16 seconds to actuate the shutter and then needing a little help from my finger over the last two or three seconds.

This shutter needs cocking before use - the cocking lever moves from left to right and up to cock the shutter.

Apertures available are f3.5 to f16.  As there are no click-stops, you can set an intermediate value if you want to.  The only other item of note on the shutter assembly is a stellate lever.  I am not entirely sure what this is for but I suspect it was to do with the hinged yellow filter that the early Vitos were fitted with.  The shutter bezel has three screws in it that are also part of the filter assembly.  When production had used up the store of pre-war parts, the bezel no longer had these three screws.

Inside is where this camera gets interesting.  The design dates from 1939 and the camera was intended to use unperforated 35mm film.  As the film was unperforated, there are no sprockets in the camera.  Instead, the camera judges the film framing with a feeler roller as in an up-market 120 camera. I have been led to believe  by the Interweb that this camera was designed to use Kodak's 828 film which is unperforated 35 mm film with backing paper like 120 film. As the film came on a spool with backing paper (again, as with 120 film) there are springs fitted to the film chambers to keep the film tight on the spools. Actually, looking at the camera, there is no reason why the camera should not have used unperforated 35 mm film in a reloadable cassette - Leica and Zeiss Ikon made such cassettes for their 35 mm cameras. I have never seen a 1939 Vito - this would tells us immediately whether the camera used 828 film or a loadable cassette as 828 film would require a red window on the back of the camera to allow the user to see at least the first frame number. There is no red window on my 1945 Vito - was there one on the 1939 version? When production restarted in 1945, Voigtlander decided to modify the camera for modern perforated 35mm film (135 format).  The only real change is that the film gate (the rectangular opening that lets the light hit the film in the correct place) is reduced to 24mm by 36mm (originally it had been 30mm by 40mm).

The film take up chamber will take the standard spool from a 35mm cassette as a take-up spool or an empty cassette can be fitted which means that when the film is finished you can open the back and cut the film with the exposed part already in a cassette.

These pictures were taken with this camera on Agfa Vista plus 200 ISO colour negative film (details here): (the black wedge would seem to be a scanning artifact.  The frames all overlap about 1-2 mm and this overlap is also wedge shaped)

Cowslip close-up (from one metre away)

Lincoln Broadgate

Lincoln High Street

Lincoln Pottergate

Serial numbers to help with dating cameras.

This is information that I have collected over the last few years from a number of sources.  Some of those sources contradict each other so I have had to make decisions as to what I wish to keep.  I cannot guarantee its accuracy.

The date a lens or shutter is made is not always the date the camera was made.  Both lenses and shutters are made and sold to camera manufacturers in batches.  A camera made in one year may have a lens made the previous year.  I have at least one camera (Zeiss Ikon Icarette) when the shutter was made the year before the lens.  It is also possible that either the shutter or the lens is a later addition made by a repairer.

Here are the links to the files:

Voigtlander lenses

Schneider lenses

Compur shutters

Carl Zeiss lenses (East and West Germany included)

Olympus Trip

Zeiss Ikon Voigtlander Vitessa 100 SR

This camera outlines the dangers of buying online.  One is reliant on the written description given by the seller and a photo or two.  Unfortunately, it is just not possible to physically examine what you are buying.

In this case, the camera was described as 'good and clean' with the seller saying that they knew nothing about cameras and so could not comment on functionality.  That last should have been a red flag to me - anyone can press the shutter release and tell if anything happens or not.  Similarly, other controls either turn, press or not and any seller can report such.

This camera is missing the battery cover which is blindingly obvious on even a cursory examination of the underside of the camera.  Less obvious but still well visible is the loose leatherette on the top (not visible in the picture supplied on Ebay) which covers two holes from which the screws have been removed.  Clearly, someone has attempted to take this camera apart.  The seller?  Or did the seller buy it in this condition and try to pass their mistake on?  I cannot know which but a small honesty on the part of the seller would have saved me buying an unusable camera.

I could have taken this up with Ebay but the cost to me was less than £10.00 including postage so it is not a major issue.  I just do not like people being dishonest with me and they now have a negative feedback for their troubles.

As to the camera itself, there is much to admire.  This model is one of the last engineered German cameras - Leica excepted - before Japanese plastic took over the world.  I don't mean that in a derogatory way as Japanese plastic has much to recommend it if only in weight.

This camera is heavy and you are not going to forget that you are carrying it.  The three main controls are easy to find by feel - at this time Zeiss Ikon had taken to putting plastic tabs on the focussing ring, aperture ring and shutter speed ring.

The aperture ring is between the other two and has the widest tabs.  The shutter speed ring is closest to the camera body and has tabs that extend to less than half the circumference of the ring.  The focussing ring is at the front and has only a small tab at the bottom below the lens.

This set-up means that it is easy to find the correct control by feel - the values are repeated in the viewfinder with a rangefinder spot in the centre for focussing.

The rangefinder is the worst aspect of this camera - the rangefinder spot is fairly small and quite faint.  It works fine but could be easier to use.

Voigtlander Vitomatic II

Voigtlander Vitomatic II

Voigtlander Vitomatic II

This is an update of the excellent Voigtländer Vito B.  The Vito B spawned several cameras - the Vitomatics I and II and the Vito BL. This is the automatic update as opposed to the more manual Vito BL. The Vitomatic II has a coupled light meter and a coupled rangefinder added and a new shutter mechanism (the Prontor SLK-V made by Gauthier) which is needed to make use of the light meter.  Voigtlander also made independent rangefinders which were less handy in use. The lens is still a Color-Skopar 50mm lens but now it is f2.8 rather than f3.5 (this might just be the items I have - I have no idea as to the options that were available regarding lenses for either the Vito B or the Vitomatic II).

View of base plate

The size of the two cameras (Vito B and Vitomatic II - I am going to be comparing the two throughout this posting) is the same except the height.  I have a version I Vito B with a small viewfinder.  The later version II had a larger viewfinder and is also higher than the version I.  So the Vito B (II) is the same size as the Vitomatic II.  The layout of the top plate differs as the Vitomatic II has an exposure meter window but is otherwise the same. The front of the camera is also different as the Vitomatic II has both an exposure meter and a rangefinder window both of which are missing on the Vito B. There is one more change that is immediately apparent - the frame counter on the Vito B is a small window above the shutter housing with an adjusting wheel below the shutter housing.  With the Vitomatic II, the frame counter is on the base plate and has a small adjusting wheel beside the counter window.

view of top plate

The presence of both the rangefinder mechanism and the light meter means that the SLK-V shutter/lens housing on the Vitomatic II is significantly larger than the SVS housing on the Vito B. The SLK-V shutter is Voigtlander's adaptation of the standard SLK shutter - this is a light meter coupled shutter.  (Both Voigtlander and Prontor were subsidiaries of Zeiss Ikon at this time.)  The Vitomatic II is also significantly heavier – something that could not be avoided with the improved specification. So, in use, the Vitomatic II still fits nicely in the hand but is much more tiring to hold for a period of time. Using the ever-ready case and hanging the camera around your neck would obviate this but I like to hold the camera in my hand – it is more discrete and faster to use.

The coupled light meter is simplicity itself to use. It is of the match needle type with the needles in the window on the top plate. This is adjusted by turning the forward most knurled wheel on the shutter housing. When the two needles are superimposed, the camera is set for a correct shutter speed/ aperture combination. This can be varied in one stop steps by turning the rearmost knurled wheel. Moving this wheel alters the speed/aperture settings but keeps them in the correct range for a viable exposure. It is a bit like the P setting on a modern digital camera. The only drawback to this system is that the meter needles are not shown in the viewfinder so you need to lower the camera and look at the top plate while setting the exposure.

The viewfinder is a reverse-Galilean finder with a large (much larger than the Vito B) eye-piece with bright lines including parallax adjustment.  The coupled rangefinder is also simple to use – this time it is accessed through the viewfinder. The rangefinder presents the user with a bright spot in the centre of the viewfinder with two separate images. The user turns the focussing ring (the smaller, forward most knurled ring) until the two images are superimposed – the lens is then correctly focussed for the part of the image in the centre spot. This is made easier by the user choosing a strong vertical to focus on.

The film chamber is accessed the same way as on a Vito B – a small portion of the base-plate is unlocked and lowered and then the back swings open. This is very secure in use and the type of accident I occasionally have with my Vito II where the catch on the back can accidentally open while the camera is in use is not possible.  The one downside is that changing films while standing in the street is cumbersome - but  far from impossible.

I now have a Vitomatic I as well.  This is the same as the Vitomatic II but without the coupled rangefinder.  I do not miss having a rangefinder as I find guessing distances works just fine - at f5.6 and smaller, the depth of field is enough to cover any slight discrepancy in the guess.

There are also "a" and "b" versions of both Vitomatics - I and II.  The "a" versions have the light meter scale mirrored in the viewfinder and the "b" versions have aperture and shutter speed mirrored in the viewfinder.

Vitomatic II in use. 

This is a fairly simple camera to use.  The light meter is not TTL so in use it is much the same as a hand-held meter.  The advantage over a hand-held meter is that aligning the match needles in the light meter window sets a usable combination of speed and aperture.  It is then simple to turn the inner ring on the shutter housing to set either a specific aperture or a specific speed according to the photographer's needs.  The shutter then selects corresponding speed/aperture to maintain correct exposure.  As this is not TTL, you do not need to fumble with the controls at eye level.  If you want to use exposure compensation you merely turn the exposure control as many stops either side of standard as you need.  As this control basically adjusts the aperture, it is possible to over/under expose by a fraction of a stop.  It is worth noting that the aperture is infinitely variable between f2.8 and f22 while the shutter speed is restricted to click-stops - it is not possible to set a speed between1/125 and 1/300, for instance.  If you try, you will get either 1/125 or 1/300 depending on the exact position of the cam inside the shutter mechanism.

This camera inherits scale focussing from the Vito B complete with two happy snapper settings of 3.25m and 10m (roughly) at f5.6.  These settings make street photography very easy.  I often keep the camera set to 1/125 and smaller than f5.6 and the focus on the distant (10m) happy snapper setting - giving everything between 4.25m and infinity in focus.  

For more critical work, there is the rangefinder.  This uses gold "silvering" of the half-silvered mirrors giving orange images in the centre of the viewfinder which are clearly seperated from the main image.  As with most rangefinders, turning the focussing knob moves one of the images - focus being achieved when the two images are exactly superimposed.  

If the lens is nearly focussed, this is quick and easy.  The downside is that focussing from one end of the scale to the other cannot be achieved in one motion but in use I am not finding this a problem.

Last comment - this is a heavy camera - particularly for its compact size - but this aids stability in use.

Sample Pictures:

Waterloo Station, London

Busker, City Square, Lincoln

Lincoln university across Brayford Pool, Lincoln

Folk buskers, Lincoln

Voigtlander Bessamatic

Voigtlander Bessamatic - 1961

This is Voigtlander's answer to Zeiss Ikon's Contaflex range and Kodak's Retina reflex range.  It was developed sometime after the Zeiss Ikon and Kodak models and this allowed Voigtlander to learn from its competitors' mistakes.  The most obvious lesson learnt is that the entire lens assembly is detachable rather than just the front element as in the Contaflex range.   The main advantage is that better quality lenses can be added.  It also has the advantage that you can access both the mirror and the focussing screen and so can keep them clean.  This is a major fault with the Contaflexes as after fifty years of use there is a build up of dirt which can be very annoying when looking through the viewfinder - although, to be fair, I don't suppose Zeiss Ikon were thinking about  a fifty year life span for their cameras.

This is a very heavy camera - significantly more heavy than a Contaflex Super.  It is similar to the Contaflex Super.  It has a coupled light meter with match-needles in the viewfinder.  Moving the match needle also moves the aperture ring - the shutter speed must be set first.  This can only be set to a value within the current exposure range.  If the shutter speed is already set to an unacceptable value (as in moving from the shade into bright sunshine) it is not possible to align the match needles.  This can be overridden by a lever on the lower right of the shutter housing.

The shutter is a Synchro-Compur - the same as on a Contaflex Super.  The speed range is 1 second to 1/500th second and B.  The lens is a Voigtlander Color-Skopar 1:2.8 50mm lens made in 1961 (going by the serial number).  These are superb lenses and are Voigtlander's version of a Carl Zeiss Jena Tessar.  Focussing is from 3.5 feet to infinity.

Voigtlander Bessamatic

A nice innovation is a couple of red pointers that move apart or together as the aperture is changed.  These mark out the depth of field on the focussing scale.  Focussing is by the whole lens assembly moving rather than just the front element so image quality should be maintained throughout the focussing range.

I have run one film through this camera, and, alas, there is light leaking into the back from three different places - without replacing all the light seals, this camera is useless.  I have now replaced the light seals but I have yet to test it with another film.

Voigtländer rangefinder

Voigtländer produced a small rangefinder as an accessory for their range of cameras in the 1950s.  There were at least two versions of this as evidenced by the shoe connector.  The rangefinder sits in the accessory shoe on top of the camera and is entirely independent of the camera.

The rangefinder is die-cast in an aluminium alloy.  Externally, there is one eyepiece and two objective lenses with a central knob/dial.  Internally, the eyepiece looks through a half-silvered mirror out through the left-hand objective lens.  The light coming in the second, right-hand objective lens is reflected by a sloping mirror onto the left-hand half-silvered mirror and hence out through the eyepiece.  The sloping mirror behind the right-hand objective lens is controlled via a cam by the external knob/dial.  Turning the knob/dial alters the angle of the mirror and so alters the path of the light towards the eyepiece.

In use, one looks through the eyepiece and sees two versions of the scene - one directly and one reflected through the second lens.  Turning the central knob/dial moves the second image from side to side.  When the images are superimposed, the correct distance can be read off the knob/dial.

This is a very simple mechanism and there is little to go wrong with it.  My rangefinder had a quantity of dust inside which was easily removed with a soft brush.  I also gently polished the surface of both mirrors.  Adjusting the rangefinder is also easy.  You merely focus on an object at a known distance away and move the knob/dial on its spindle so that the correct distance is against the mark.

The only real fault is that the second, right-hand objective lens is rather small so the image reflected off the half-silvered mirror is relatively faint - half the light from from this objective passes through the half-silvered mirror and we only see an image that is half as bright as that from the left-hand objective lens.  To help, the half-silvered mirror is tinted orange which makes the faint image easier to see.

Voigtlander Vito B and Vito BL

Voigtlander Vito B & BL

Voigtlander Vito B

Vito B (BL lower down)

This is a very nice camera from the 1950s (1956 for this camera). It is well designed and well made – no plastic (at least not visibly) and the pressings and millings are neatly finished. It is a pleasure to look at and to hold.

lens:  Color-Skopar

focal length:  50 mm

apertures: f3.5 to f16

focus range: 0.8 m (2.6 ft)

lens fitting: fixed

shutter: Prontor SVS

speeds: 1 s to 1/300 s

flash: PC socket

film size: 35mm

Voigtlander's Vito B was their first rigid 35mm camera - made in Braunschweig, Germany.  It was brought out in 1954 and was a Vito II replacement for the excellent .  It was discontinued about 1961.  The Vito B spawned a number of other cameras - Vitomatics I and II and the BL series.  These had built-in light meters and, in the case of the Vitomatic II, a coupled rangefinder.  The price new in England was around £24 for the model with the Prontor SVS shutter.  In 1959, a new model was brought out with a larger bright-line viewfinder.  The camera is only 115 mm wide, 70mm front to back and 70 mm high. This fits well into the hand and is small enough to fit into a coat pocket. It also has a lens hood which adds a further 25 mm to its length. This is the successor to the Vito II folding camera and is both slightly smaller and slightly heavier than its predecessor but with the disadvantage for carrying that the lens does not fold away. The main structure of the camera is die cast with pressed chrome plated covers.

The film advance lever falls nicely to the thumb in use but travels well to the front of the camera which is a bit awkward in use. There is also an accessory shoe on top which is designed for a rangefinder as much as for a flash gun. There is a PC  (for Prontor Compur) socket on the underside of the lens for a flash gun – the camera can synchronise for bulb flash (M) and electronic flash (X). The flash synchronising lever is also used to set the shutter delay timer (V for Vorlaufwerk). The shutter is cocked by advancing the film – an improvement over the Vito II which had a manual cocking lever on the shutter housing. It is also an improvement over the later Vito Automatic I where the shutter release also cocked the shutter during the first part of its travel.

The lens is a 50mm Color-Skopar with a maximum aperture of f3.5. This lens is based on Zeiss Ikon's Tessar lens – four elements, two of which are cemented together and air gaps between the others. These lenses are surprisingly good, especially if you stop the lens down to f8.   Focussing is by way of the whole lens assembly so image quality is not reduced as you focus closer.  The lens takes a 32 mm push fit filter or lens hood.

Focussing is either scale focussing which relies on you knowing the distance to the subject or zone focussing with two settings – o which focusses the lens to between 15 feet and infinity and ߜ which focusses the lens to between 8 and 18 feet. Both of these need the aperture to be set to f5.6 or better.   Voigtländer  produced a small rangefinder to fit on the accessory shoe which allowed accurate measurement of the distance but this was not coupled to the focusing and needed the user to read off the distance from the rangefinder and then set that distance on the focussing ring.

Behind the lens is a either a three speed Pronto or an eight speed Prontor-SVS shutter.  There is also a shutter delay timer but on old cameras it is supposed to be a bad idea to use this – although on my 56 year old camera it works fine on fast speeds (1/100, 1/300) but not at all on any of the slower speeds. The shutter works quite well at faster speeds from 1/300 to 1/25) but is very slow indeed on the slower speeds – 1/10 second is actually above five seconds! This probably means that the shutter mechanism needs a service but I have to ask if the cost of this is warranted. I have found on other cameras that the shutter works better after it has been used a few times. When acquiring a new old camera it is worth bearing in mind that the cameras has probably been sitting unused in a drawer for the last thirty years or so.

The film chamber opens in an unusual way – first you open a small door in the base and then the back will swing open.  This is designed to make inserting a film easier and works quite well but for some reason Voigtländer abandoned this on subsequent cameras. Fitting the film is extremely easy. The film sprocket holes fit over a large toothed wheel which serves to cock the shutter when the film is advanced. For this reason, an empty camera will not allow you to fire the shutter. When the film is fitted, you have to turn a toothed wheel on the underside to set the number of frames available. This number appears in a window just above the lens and shows the number of frames still available – the camera counts down from 24/36 to zero. There is also a strange prong just below the lens – this appears to be a foot so the camera will stand on a flat surface when using the shutter delay timer but no mention is made of it in the manual.

The view finder is very small being 8mm in diameter at the rear and 10x16 mm in the front. This means the view is rather smaller than real life  at about two thirds but is adequate and certainly bright enough.

The pictures that this camera produces are good even by modern standards.

Vito BL

The Vito BL is based on the Vito B mark II - that is, the version with the larger viewfinder. There are two changes. One is the addition of a light meter to the camera. The second is these of an EV enabled shutter (I am given to understand that some Vito B cameras also had EV enabled shutters but I have never seen one). The shutter is a Prontor SVS - the same as the Vito B above.

The light meter uses a selenium cell which does not need a battery to work. Selenium light metre's get an undeservedly bad press predicated on their losing sensitivity over time. While this is theoretically correct, I have yet to see a selenium meter that was not still accurate, even with meters that are over 55 years old.

With the design of the meter, film speed (ISO) is set by turning a knurled knob on the back of the top plate. This moves a series of numbers into view. Each series is identified by a letter - each letter represents a different ASA/ISO rating. B is 12 DIN/12 ASA, C is 15 DIN/25 ASA, D is 18 DIN/50 ASA, E is 21 DIN/100ASA, F is 24 DIN/200 ASA and G is 27 DIN/400 ASA. For those who are not aware, films speeds double with 3 added to the DIN rating. 24 DIN is twice as fast as 21 DIN. With ASA/ISO, double the film speed has double the ASA rating. 400 ASA is twice as fast as 200 ASA.

Meter set to F - 24 DIN or 200 ASA/ISO

To read the meter, turn the knob on the back until the letters representing your film speed comes into view.  You then point the camera at the subject and look at the needle in the meter display. It will be sitting in either a white or a black zone. At the left edge of the zones are the EV values. The EV value adjacent to the zone the needle is in is then set on the EV range on the shutter - to do this, you have to depress a chrome lug on the left, besides the EV 2.

Knurled meter knob below meter

The EV enabled shutter has the usual shutter speed and aperture rings but they are linked by a third ring - the EV ring (EV stands for Exposure Value). When you set the EV value from the light meter, you link a range of shutter speeds to a range of apertures. You can then turn the shutter speed ring to select a combination of shutter speed and aperture but only those that give the required exposure (it is rather like P mode on a digital camera in that a respect). See three photos below. The range of EVs available are from 2 to 18. EV 2 is 2 seconds at f/3.5 and EV 18 is 1/300 seconds at f/22 A summers day in England is usually going to be about EV 14 to EV 15.

In every other aspect, this Vito BL is the same as a Vito B.

EV set to 11 - 1/60 second and f/5.6

EV set to 11 - 1/200 second and f/3.5

EV set to 11 - 1/4 second and f/22

Photos from the Vito B

Camera

QSS-30

Oddfellows Hall, Lincoln

Camera

QSS-30

Busker in Lincoln

Camera

QSS-30

Roof tops in Lincoln, Abbey ward.

Voigtländer and I in Pursuit of Shadow Catching: A Story of Fifty-Two Years' Companionship with a Camera
Voigtlander Repair Notes
 VOIGTLANDER 35 MM GUIDE
Voigtlander Repair Notes