Voigtlander Vito I

Voigtlander Vito

I have used as a title for this article 'Vito I' but the camera is actually the Vito - Voigtlander were not aware of the forthcoming Vito range at this point.  I already have an article on the Vito II here and much in that article applies here as well.  The two cameras are very similar as you might expect.  The lens serial number says the lens was made in 1945 which is also the probable date of manufacture - one of the first cameras to be made in war-ravished Germany.

lens: Skopar

focal length: 50mm

apertures: 3.5 to 16

focus range: 1 metre to infinity

lens fitting: fixed

shutter: Prontor II

speeds:  1/5 to 1/200

flash: synchronised for bulbs

film size:  35mm

The camera is a folder and nicely compact when closed.  It measures 120mm by 70mm by 40mm closed and 120mm by 70mm by 80mm when open.  Closed, it nicely fits in a trouser or jacket pocket.  The only distinguishing mark on the closed camera is an ornate 'V' on the lens door and a fairly indistinct 'Voigtlander' is embossed on the leatherette on the back together with the model name 'Vito'.  There is also the country of origin embossed on the back which is 'Germany'.  As Germany is the English name for the country this indicates that it is an official import.  Strangely, for an official import, the focussing scale is in metres rather than feet, suggesting that Voigtlander were not fully geared up for export in 1945.

Vito top view

The top plate is very uncluttered.  There is a knurled ring at either end.  The right-hand ring is the film advance and the left-hand ring the rewind.  In the centre of the top plate is a very small, reverse Galilean viewfinder.  The eyepiece is only 5mm by 2.5mm.  The image seen is roughly 0.5 times life size.  This is very small compared to more modern viewfinders but it is more than adequate.  There is also a frame counter which counts up from one.  There is no accessory shoe (flash shoe) although one was available as an extra and fitted over the viewfinder.

On the rear of the top plate is a lever.  In the normal position (down) the film advance will only advance one frame.  When raised, the film can be advanced as far as you want and can be rewound.  The toothed wheel which is exposed by raising the this lever can be used to set the frame number to one.

The underside of the camera contains three items.  Close to the centre is a 3/8 Whitworth tripod boss.  A 1/4 Whitworth insert would have been available for the more usual tripod size.  There is also a button to release the lens door.  This is spring loaded and partially opens the door.  This door never sprung open under its own steam and from new they needed the user to fully open the door once it was released.

The third item on the base is two 'feet'.  These are little more than pins.  A third foot is on the lens door giving three feet altogether which allow the camera to sit stably on a flat surface.  This is primarily intended to allow group portraits using the self-timer.

When the door is opened, the lens comes forward on its bellows and locks in place.  The shutter release is on the top edge of the door together with a threaded socket for a standard cable release.

Vito - lens door open

The lens is a Skopar f3.5, 50mm lens.  This is the original version of the famous Color-Skopar and is not calculated for colour film.  However, it is intended for panchromatic film so should perform well with colour film.  See the test pictures below for details.  This lens focusses from one metre to infinity and has Voigtlander's usual two Happy Snapper settings - a circle for the hyperfocal distance at f5.6 (approximately five metres to infinity at f5.6 or 2.5 metres to infinity at f16) and a triangle which gives a focus range of 2.5 metres to five metres at f5.6 (ideal for groups).  This lens has no blue/purple tinge and so cannot have been coated as was normal post-WWII and so will be liable to flare.

The shutter is a Prontor II (which is the same as a Klio on a Zeiss Ikon camera) which is a pre-war design and was soon to be updated to the Prontor S.  This Prontor II has a PC connector and so must be synchronised for flash - I would suspect for fast flash bulbs (F: sync) but there is no indication of this on the shutter housing (my Vito II has a Pronto shutter and this is specifically marked F:).  Shutter speeds are 1/5, 1/10, 1/25, 1/50, 1/100 and 1/200 which is more than adequate.  The bezel of the shutter housing bears the shutter name - Prontor II - Gauthier's maker logo and Voigtlander's script name.

Vito - lens and shutter

There is a self-timer lever which we are always told not to use on old cameras to prevent damage to the shutter.  It barely works on this camera, taking 16 seconds to actuate the shutter and then needing a little help from my finger over the last two or three seconds.

This shutter needs cocking before use - the cocking lever moves from left to right and up to cock the shutter.

Apertures available are f3.5 to f16.  As there are no click-stops, you can set an intermediate value if you want to.  The only other item of note on the shutter assembly is a stellate lever.  I am not entirely sure what this is for but I suspect it was to do with the hinged yellow filter that the early Vitos were fitted with.  The shutter bezel has three screws in it that are also part of the filter assembly.  When production had used up the store of pre-war parts, the bezel no longer had these three screws.

Inside is where this camera gets interesting.  The design dates from 1939 and the camera was intended to use unperforated 35mm film.  As the film was unperforated, there are no sprockets in the camera.  Instead, the camera judges the film framing with a feeler roller as in an up-market 120 camera. I have been led to believe  by the Interweb that this camera was designed to use Kodak's 828 film which is unperforated 35 mm film with backing paper like 120 film. As the film came on a spool with backing paper (again, as with 120 film) there are springs fitted to the film chambers to keep the film tight on the spools. Actually, looking at the camera, there is no reason why the camera should not have used unperforated 35 mm film in a reloadable cassette - Leica and Zeiss Ikon made such cassettes for their 35 mm cameras. I have never seen a 1939 Vito - this would tells us immediately whether the camera used 828 film or a loadable cassette as 828 film would require a red window on the back of the camera to allow the user to see at least the first frame number. There is no red window on my 1945 Vito - was there one on the 1939 version? When production restarted in 1945, Voigtlander decided to modify the camera for modern perforated 35mm film (135 format).  The only real change is that the film gate (the rectangular opening that lets the light hit the film in the correct place) is reduced to 24mm by 36mm (originally it had been 30mm by 40mm).

The film take up chamber will take the standard spool from a 35mm cassette as a take-up spool or an empty cassette can be fitted which means that when the film is finished you can open the back and cut the film with the exposed part already in a cassette.

These pictures were taken with this camera on Agfa Vista plus 200 ISO colour negative film (details here): (the black wedge would seem to be a scanning artifact.  The frames all overlap about 1-2 mm and this overlap is also wedge shaped)

Cowslip close-up (from one metre away)

Lincoln Broadgate

Lincoln High Street

Lincoln Pottergate

Agfa Billy Record

Agfa Billy-Record

Agfa Billy-Record landscape format

This is a fairly standard full frame 120 film camera from the mid 1930s.  I think this camera is a grey import - no "made in Germany", distance scale in metres and the tripod socket is continental rather than UK or USA.

The camera takes eight pictures on 120 film which makes it an expensive camera to use.  There are two finders: a brilliant finder and a two frame Galilean finder.  I can never get on with brilliant finders - too small mostly.  The shutter is a Prontor II from Gauthier and the lens is Agfa's Apotar 10.5 cm focal length and f4.5 maximum aperture.  This lens performs very well - with colour as well as monochrome.  Lenses from the 1930s were usually colour corrected even though colour film was unusual.  This is because the new (for the time) panchromatic films were sensitive to all colours and non-colour corrected lenses would produce a very soft image.

Shutter speeds on the Prontor II are 1, 1/2, 1/5, 1/10, 1/25, 1/50, 1/100 and 1/150 as well as B and T.  1/25 and 1/50 seem very slow by modern standards. but the 6cm by 9cm negatives would be unlikely to be enlarged.  For most people, contact prints would be normal.  The lack of flash synchronisation and the 1/150 maximum shutter speed date this to the first Prontor II design and so dates the camera to between 1934 and 1938.

The lens focusses down to less than one metre to infinity.  On my camera, the lens will not focus to infinity - either because the grease on the focussing thread has solidified (something Agfas are notorious for) or because someone has attempted a repair (also common on old cameras).

As was normal until the mid 1950s, the shutter release lever is on the shutter housing.  As was also normal from 1930ish, Agfa provide a secondary shutter release on the camera body which is connected to the lever on the shutter housing by an articulated link.  This is a seriously weak link and barely works on my camera.  When opening the camera, there is a significant danger of the release link missing the lever on the shutter housing.  Agfa actually stress the importance of this in the manual for the camera.  The long term effect of this link missing its proper location is that the link has bent and frequently dis-articulates itself.

There are the two tripod bushes we would expect on a camera of this format and date.  One is on the base board - centrally placed which makes fitting a tripod easier than on some cameras - and one near the centre of the base.  Both are 3/8 Whitworth which is larger than most tripods use.  My other cameras from this era have a 1/4 Whitworth insert and these may well have been present at some time.

Sample pictures:

Stamp End, Lincoln

Lincoln Cathedral