Zorki 4

The Zorki 4 camera was made by KMZ ( Krasnogorsk Mechanical Factory)  in the former USSR near Moscow. The name 'Zorki' means 'sharp sighted' in English. Over 1,700,000 Zorki 4 cameras were made in total. The original Zorki was a direct copy of a Leica II camera but the camera underwent many alterations and improvements and the Zorki 4 was an entirely Russian design. Zorki cameras were supplied originally supplied with an Industar-22 lens ( a copy of a Carl Zeiss Tessar) but the Zorki 4 was supplied with a Jupiter-8 lens which is a copy of a Carl Zeiss Jena Sonnar lens. Zorki cameras were made between 1956 and 1973.

Zorki 4, front view (copyright John Margetts)

lens: Jupiter-8

focal length:  50mm

apertures: f2 to f22

focus range: 1 metre to infinity

lens fitting: LTM (or M39)

shutter: cloth focal plane

speeds: 1/60 to 1/1000 (there are also slower speeds but the numbers have worn off the dial and I cannot read them)

flash: PC socket synch for M and X

film size: 35 mm

The camera measures 145 by 35 by 85 mm (not including the lens) and the lens adds another 40 mm when focussed on 1 metre.  It weighs a significant 720 grams when loaded with a 24 exposure film.

---------------------------------------------------------------------------------------------------------------------------------

blog copyright 2014, John Margetts

----------------------------------------------------------------------------------------------------------------------------------

The controls are as you would expect and hold no surprises. On the far right is the film advance. This is a knob - rather antiquated for 1973 (when this camera was made) - which I rather like. I certainly do not miss having a film advance lever, the winding action of the knob allowing a valuable pause for thought. Set into the top of the film advance knob is the frame counter. Next to the film advance knob is a central raised section. On the right of this section is the shutter release button. This is towards the back of the camera which I find a little awkward but it is quite usable. It is threaded for a standard cable release. Around the shutter release button is a knurled collar which you turn clockwise to release the mechanism for rewinding the film.

Next to this is the shutter speed selector. The standard advice for Soviet cameras applies here - always advance the film before changing the shutter speed or risk damaging the selector mechanism. This is important enough for the original retailer of this camera to have supplied a metal sticker on then inside of the ever-ready case to remind the user.

Around the speed selector is a large ring used to set the type of flash synchronisation - either M or X. Next to this is the accessory shoe - this has no contacts so is a 'cold' shoe in flash terms.  On the far left, at the same lower level as the film advance, is the rewind knob. This is telescopic to make rewinding the film easier. A very nice touch not often found on cameras is a lever below the rewind knob which allows the user to focus the viewfinder - this means I can use the camera without my glasses on and still have a clear view.

Zorki 4 showing top plate.

The back of the camera is rather plain. On the left of the top plate is the viewfinder eye-piece. This doubles as the rangefinder eyepiece. On the right of the top plate is the KMZ logo of a prism with a ray of light passing through it and the legend 'MADE IN USSR' (Union of Soviet Socialist Republics, for our younger readers). Below this is the body serial number  - with Soviet cameras the first two digits of the serial number give the year of manufacture, in this case 1973.

Zorki 4, rear view

The base plate of the camera has a tripod boss below the lens which is a standard 1/4 inch Whitworth thread. On either end of the base plate are the catches for the base/back which are removed as one to load the film.

Zorki 4, base of camera

The front of the top plate has the viewfinder which is quite large (18 by 12 mm), a centrally placed rangefinder window which is rather small and the PC socket for the flash. Above these is the stencilled legend - Zorki-4. The camera body has the lens (where else?) and the self-timer.

The lens is a Jupiter-8 lens. This is a copy of a Carl Zeiss Jena Sonnar lens. Early production was cased is plain aluminium but by this date the aluminium was paint matt black. the use of aluminium gives a very light lens but at the expense of toughness. This specimen has been bashed at some point and the filter thread has a flattened part meaning I will not be able to use filters on this camera - no great loss as I rarely use filters.

The lens serial number has the same format as the body number and shows that the lens was also made in 1973.

The specification of the lens is quite impressive. It has six elements in three groups, for the optical aficionados, and has a maximum aperture of f2. This is quite a wide aperture for any lens and as wide as you will find on a camera of this age. As a landscape photographer I will rarely use any lens this wide open. The iris diaphragm has nine blades giving a close to circular aperture which should produce nice bokeh.

Using the Zorki-4

This is a rangefinder camera so the first thing to note is using the rangefinder. This is not too easy. For those who have never used a rangefinder - the technique involves turning the focus ring on the lens until two images in the viewfinder are on top of each other. To work well, the two images must be easy to see and that is where this rangefinder falls down. The rangefinder window on the front of the camera is small - 5 by 3 mm - which gives a very dim second image. It does work and I have been using it successfully but it is not easy.  One thing that is common with rangefinders is to 'silver' the internal mirror with gold rather than silver or mercury as this gives an orange image which is easier to see. Alas, Zorki have not done this and you end up peering into the viewfinder looking for the secondary image. I shall probably use this camera as a scale focus camera and rely on the hyperfocal distance as I do with most of my non-reflex cameras.

--------------------------------------------------------------------------------------------------------------------------

blog copyright 2014, John Margetts

--------------------------------------------------------------------------------------------------------------------------

Apart from the rangefinder aspect, the viewfinder is bright and clear. As I mentioned above, it is possible to focus the viewfinder to allow for personal defects in vision and I find this to be very useful. The viewfinder is both above and to one side of the lens. This will introduce parallax errors for anything other than landscapes. Parallax is where the lens and viewfinder are both looking at the same object but from different places. For a head-and-shoulders portrait, it will be necessary to keep the person towards both the right and bottom of the viewfinder - experience will tell the photographer exactly haw far to the right or bottom to go. With many camera there are secondary bright lines in the viewfinder to frame close up shots. With up-market cameras the viewfinder adjusts its view as you focus, but this is not an up-market camera.

Focussing the lens is smooth and easy as is setting the aperture. The aperture ring has two scales - the front of the lens turns as you focus and if there was just the one scale you would not be able to read it at both near focus and infinity. The aperture ring has no click stops. This means that you can set intermediate apertures if you want to but also means that you can inadvertently alter the aperture so checking is a good idea before firing the shutter.

Setting the shutter speed is not as clear as it could be. The dot on the scale does not line up exactly with the numbers. The height of the selector knob changes with speed - 1/60 and slower raise up the selector knob - 1/125 is the slowest sped with the selector knob in the lower position - you can then count positions to accurately set 1/250, 1/500 and 1/1000.

Having framed your picture and focussed the lens, pressing the shutter release needs a firm but not excessive pressure to fire the shutter. I do not like too easy shutters as I am liable to fire accidentally as I am still composing - not a problem I shall have with this camera. When the shutter is fired, the camera makes a definite squeak. Exakta cameras are notorious for this and then it indicates that the shutter needs lubrication. I suspect that it is the same with this Zorki but the cost of paying someone to lubricate it will be much more than the camera is worth.

Winding the film on is easy even though the film advance is a knob and not a lever. The one bit I do find slightly awkward is the fact that the knob turns clockwise - the film is wound onto the take-up spool emulsion outwards. Neither really matters but I find moving the advance clockwise to be non-intuitive.

Test pictures

I am quite pleased with these pictures overall. The lab that developed the film for me (Snappy Snaps, Lincoln) told me that some frames were overexposed but mostly they are within the latitude of the film (but see the yellow flowers below). Over-exposure suggests a slow shutter ( or me moving the aperture setting inadvertently). This is a 1973 camera that has most probably never been serviced and not used in some time - there was a film in the camera that had been there long enough to be forgotten about when I bought the camera. 

I took a variety of fairly close-up shots to test the calibration of the rangefinder - all seems to be well. I also used the lens wide open and at f4 for the flower shots to see how well the lens performs.

Russian lenses are generally very good, particularly when stopped down. Where Russian lenses do not perform well it is usually down to careless assembly in the factory or an owner messing about with the lens, rather than the glass itself.

In summary, this lens gives good colour rendition and good contrast. The lens is plenty sharp enough. The camera is slightly over-exposing but not to an extent I cannot compensate for. In fact, with use, the shutter might start running correctly.

I am giving individual comments on each photo below.

This is the only photograph to show the white band on the left. It was also the last frame on the roll of film. I am assuming that its position on the film is the cause of the white band. The picture has good focus and good contrast.

Here, I focussed on one of the pink petunias. This shows that the rangefinder is pretty well calibrated as it should be. The result of some over-exposure is visible in the pink.

These buskers are a fairly regular sight in Lincoln city centre. I focussed on the accordion as being the only part of them with the strong lines that the dim rangefinder needed.

This shot did not use the rangefinder but rather my usual habit of using the hyperfocal distance. I am quite pleased with the sharpness of this.

Lincoln Market Hall. Again, using the hyperfocal distance rather than the rangefinder.

For this flower shot, I focussed on one of the yellow flowers (a potentilla). The detail in the flowers is almost completely blown - a result of over-exposure. The leaves, being that bit darker, have retained their detail.

 These lavender flowers did better. Again, I am happy with the focus that the rangefinder gave me. This shot was with the lens wide open (f2).

The Siemens' factory on the banks of the Witham in Lincoln. Another hyperfocal picture. I like both the colour rendition and the contrast.

 The same factory complete with reflection. No flare which I had thought might be a problem with this lens.

 A close-up of a disused part of the Siemens' factory and a part of the Witham sluice. A hint of flare in the upper left of the brick-work.

 Factory and sluice from further back.

 For this close-up of the steel rail, I focussed on the top of the first upright. The lens was wide open (f2) and the metal-work is in good focus. The rangefinder is as well calibrated as it could be.

The Witham in the city centre where it flows under the medieval bridge. It is now usual to have a number of barges moored along here although a few years ago it would have been unusual.

A trio of Rockabilly buskers who play in the city centre on a regular basis. I focussed on the double bass with the lens stopped down. Again, good colours and good contrast.

Exa 500

This is my fourth Ihagee camera and my third Exa.  The original Exa was a cut-down low-cost version of the Exakta and then the Exa line developed in its own right.

Exa 500 - front view

The Exa 500 is the end of the line for Exa cameras  and was developed after Ihagee was subsumed into VEB Pentacon, the state camera manufacturer.  The lineage from the Exakta is apparent in the shape.  This camera still has the rhomboidal shape introduced with the original 127 format Exakta in 1933.  It also still has the shutter release on the left, although the film advance is now on the right.  Another change is the fixed pentaprism viewfinder, so I cannot use the delightful waist level finder with this camera.

The immediate predecessor of this camera was the Exa II.  The body of the Exa IIa and this Exa 500 are identical although there are some internal differences.

Exa 500 - top view showing rhomboidal shape

The Exa 500 has a vertical cloth focal plane shutter which travels from bottom to top.  This shutter provides speeds from 1/2 to 1/500 seconds plus B.  This means it is twice as fast as the Exa II.  There are two flash settings: 1/60 for electronic flash and 1/15 for flash bulbs. This camera follows the Exa standard and flash synch is achieved by aligning a dot on the speed dial with either a zigzag icon or a bulb icon.  On the front of the body is a single PC connector.

This camera also has a shutter lock beside the viewfinder - cover the red dot to shoot, uncover to store the camera.  The only other real change between the Exa II and the Exa 500 is that the Exa 500 has an instant return mirror so the viewfinder does not go blank when you fire a shot.

Like other Exakta/Exa cameras, the film take-up spool is removable and can be replaced with an empty film cassette.  Doing this obviates the need to rewind the film but it does cost you one frame of film.  There is no internal knife to cut the film like the Exaktas have so this must be done after opening the back.  The only real advantage of this is the possibility of developing half a roll of film but I cannot imaging that many people have ever bothered.

The film advance is on the right as is normal in non-Ihagee cameras.  It has quite a short stroke of just over 90 degrees (compared to the Exakta Varex II where the advance travels about 300 degrees).

The back of these cameras come away from the camera body in one piece with the base.  This is supposed to make it easier to load film but I find this method harder.

Exa 500 - inside and the separated back  and take-up spool

Exa cameras were supplied with a variety of lenses depending on how much the customer wanted to pay.  This camera has a Meyer-Optik Domiplan. This is a triplet design so not as good as the Tessar option, but the Domiplan performs well enough when stopped down.  The lens is a semi-automatic lens - the diaphragm closes when the shutter release is pressed but stays open for composition and focussing.

The Domiplan achieves this automation by a hinged lug that protrudes over the shutter release - the photographer presses this lug which in turn presses the shutter release.

This mechanism in the Domiplan lens has a weak link that is prone to seizing but this particular lens performs OK.  My other Domiplan lens needed the mechanism cleaning with naphtha before it would work satisfactorily.

This camera would also work with my Exa fit Carl Zeiss Jena Tessar (we need to specify Carl Zeiss Jena in contradiction to Carl Zeiss Opton, the new (at the time) Carl Zeiss operation in West Germany.  East German Carl Zeiss Jena lenses are generally better than Carl Zeiss Opton lenses).

In use, this camera is much as you would expect.  The shutter speed selector is rather loose and I was not sure I was actually selecting any speed, but I tried exposures at various shutter speeds and they have all come out well exposed so the shutter speed selector must be doing its job.

There is a red flag in the viewfinder to tell you that you need to advance the film before taking the next shot.  In previous Exa cameras this was not necessary as the mirror would only return to the viewing position when you had wound on.  In this model, the mirror is an instant return mirror and it would seem that the makers thought users might get confused with such sophistication, hence the red flag.

The camera is light-proof (not a given with old cameras) and the shutter is moving smoothly.

Here are some sample photographs from my test film:

Ihagee Exakta Varex IIb

This is one of Ihagee's 'serious' cameras.  It is very similar to the two Exas I already own but has more facilities and is built to a higher standard.  It is the usual Exakta/Exa rhomboidal shape.  On my two Exa cameras, the back and base come away as one to allow film loading.  The Varex IIb is more traditional with a hinged back.  This back, however, is also removable if you want.

lens: none
focal length:  n/a
apertures: n/a
focus range: n/a
lens fitting: Exakta double bayonet
shutter: horizontal cloth focal plane
speeds: 12 seconds to 1/1000 seconds
flash: three PC connectors, no accessory shoe
film size:  35mm

Exakta Varex IIb with lens and viewfinder added

The camera is heavy, weighing 581g without lens or viewfinder.  It is left-handed.  The film advance is on the left as is the shutter release and one of the two (yes, two) shutter speed selectors.

This camera came without a lens and has both (yes, both) the Exakta bayonet mounts so this camera will take any Exakta fit lens.  Strictly, this is a Varex IIa type bayonet as it has slots at the inner bayonet flanges (not sure why).

Exakta Varex IIb as I bought it

The reason for having two bayonet mounts on one camera is that the original mount restricted the width of attached lenses.  When Ihagee developed telephoto lenses, there was too much vignetting of the image to be usable. The new bayonet mount has a wider diameter and so allows wider lenses to be fitted.  (note: I am using the word 'wider' in a mechanical sense, not in its other, optical, sense.)

The shutter release is beside the lens mount to allow the use of automatic lenses.  In the Exakta system, the lens has a secondary shutter release which fits over the camera's shutter release.  When you press the lens' secondary release, the lens diaphragm closes and the primary release is pressed, actuating the shutter.

The shutter is a horizontal cloth focal plane shutter.  On this particular specimen, the shutter is faulty.  The mechanism sounds dry (there is a faint but clear squeal when the shutter actuates), the second curtain is significantly wrinkled and, at the slower speeds, the second curtain doesn't quite close.  At 1/1000, it works fine.

This is the only camera I have seen that has two speed selectors.  On the left is a small conventional selector that covers speeds from 1/30 to 1/1000 plus B and T.  This works in a fairly conventional manner - lift, turn to the required speed and release.

slow speed selector

fast speed selector

On the right of the camera is another speed selector which covers speeds from 1/8 to 12 seconds.  These figures are in black.  This selector also provides a delay of up to six seconds (using the figures in red).  When using the delay, you also get mirror lock up so reduced vibration can be achieved when using the macro attachment - a facility that no other of my SLRs has until my Canon EOS of 1995.  In the centre of the slow speed selector there is a film speed reminder dial.  As this camera is totally manual, this dial does nothing except remind you what film you have loaded into the camera.

Another quirky thing about Exakta cameras is the film advance lever.  This moves through over 300 degrees which is more than you can do in one motion.  I am actually finding this ok but I start the motion with my left thumb for the first half of the travel and then my left index finger takes over.  Around the film advance lever there is a frame counter.  This counts up from zero - so tells you how many frames you have shot.  It is also quirky as the frame count changes when you press the shutter release rather than when you advance the film.

Exakta cameras have exchangeable viewfinders.  When I bought this camera, there was no viewfinder with it, just a rectangular hole in the top plate.  I have two viewfinders for my Exa cameras and these fit this camera so I have a choice of an eye-level finder and a waist level finder.

Hole in the top plate for fitting the viewfinder

Moving to the front of the camera, there is little to note.  As I have mentioned, there is a double bayonet mount and a shutter release.  There are also three (yes, three) PC connectors for a flash gun.  Ihagee seem to have tried to be as idiosyncratic as possible with their cameras.  Rather than go down the route used by Prontor and Compur (hence PC) and have a switch to select between bulb and electronic flash, Ihagee have provided separate connectors , one for electronic flash and two for flash bulbs.

In fact, the three PC connectors can be used in various ways to allow different shutter speeds.  Using the X connector and a shutter speed of 1/60 allows use of electronic flash.  Using the FP (Focal Plane) connector allows shutter speeds up to 1/1000 seconds which is an incredibly fast shutter speed for flash.  The manual gives guide numbers for different bulbs and shutter speeds - the fast speeds being achieved because the flashbulbs suitable for the FP connector have a flash duration of around 1/40 second and so are burning throughout the expossure.  The F (Fast) connector allows small fast flashbulbs to be used with a shutter speed of 1/30.  The X (Electronic) connector can also be used with a shutter speed of 1/8 with any flashbulb.  I am not sure how much advantage is given to the photographer with the above choices, but I almost never use flash and have never used flashbulbs, so I am likely to be missing the point.

Underneath the camera are four knobs.  The smallest of these unscrews to allow the use of an internal knife to cut the film when an empty cassette is used in place of the take-up spool.  Next to this is the rewind knob with a small folding crank.  At the other end of the camera is a knob which is pulled away from the camera to release the catch on the back.  Between these two knobs is the tripod boss which is the standard 1/4 Whitworth tread.

Base of camera

The outside of the back has two small chrome rectangles and one large chrome rectangle.  These are the fitting for internal components, the small rectangles help to keep the film flat and the large rectangle is part of the fitting of the pressure plate.

Rear of camera

The camera in use:

I am trying out this camera (despite having a faulty shutter) with a roll of out-of-date and no longer made film - Kodak Plus X.  I have never used this film before but it had a very good reputation.  This film is monochrome and is rated at 125 ASA/22 DIN.  I don't know why but it seemed appropriate to try this camera with a vintage monochrome film.

The camera set-up I am using is the Varex IIb body, Carl Zeiss Jena Tessar (50mm and f2.8) and a waist-level viewfinder with a plain focussing screen.  [This lens should not be confused with a Carl Zeiss Opton Tessar from West Germany.  The Carl Zeiss Jena lens is the real thing.]

There are many options available for this camera for both lens and finder.  I have the Carl Zeiss Jena Tessar and two Meyer-Optik Domiplan lenses available and the waist-level finder and a pentaprism eye-level finder.  I am enjoying the waist-level finder but must admit to struggling a bit with the reverse action when I move the camera.

First aspect of the waist-level finder is the fact that the image is reversed left-to-right.  If you want to move the image to the right, you need to move the camera to the left.

It is also easy to get verticals at an angle.  Again, you have to move the camera the 'wrong' way to correct this.

This finder has a plain focussing screen which makes focussing a bit harder.  For me, this is not a significant problem as I usually use hyperfocal focussing.  On the rare occasions when I rely on critical focussing, there is a hinged magnifier available which is more than I shall ever need.  If not, other focussing screens are available with micro-prisms and split-image centres.

I have been carrying this camera around for about an hour this afternoon and I can confirm that this is a heavy camera.  There are strap lugs with split rings available to connect a strap.  A nice touch is the presence of triangular leather patches behind the split rings to stop the rings and strap ends from scratching the camera body.  While I have a number of straps available, I have not fitted one to this camera.

Contrary to my usual practice, I am using a shutter-priority exposure system, adjusting the aperture to vary the exposure.  The reason I am doing this is because this ('faulty') shutter seems to perform best at 1/125 seconds so I am keeping it set at this speed.

What I am finding, which delights me, is that I am seeing the image in the wauist-level finder as a picture rather than as a view.  This is making composition not so much easier (see my comments about image reversal) but clearer and more precise.  So far I much prefer it.

I am also finding the left-hand operation surprisingly easy.  I am no longer pressing the slow speed selector hoping to fire the shutter.  The film advance with its 300 degree travel is also surprisingly easy to use left handed.

As I have already said, I usually use hyperfocal focussing but if I did not I think I would find right-handed focussing cumbersome.

My first film being completed, I need to develop the film and scan it.  Then I shall post some sample pictures here.

Film is now developed and scanned.  Here are some example pictures, clearly showing the problem with the shutter is one of them.  The rest are not too bad (if you ignore my poor scanning ability!).

Serial numbers to help with dating cameras.

This is information that I have collected over the last few years from a number of sources.  Some of those sources contradict each other so I have had to make decisions as to what I wish to keep.  I cannot guarantee its accuracy.

The date a lens or shutter is made is not always the date the camera was made.  Both lenses and shutters are made and sold to camera manufacturers in batches.  A camera made in one year may have a lens made the previous year.  I have at least one camera (Zeiss Ikon Icarette) when the shutter was made the year before the lens.  It is also possible that either the shutter or the lens is a later addition made by a repairer.

Here are the links to the files:

Voigtlander lenses

Schneider lenses

Compur shutters

Carl Zeiss lenses (East and West Germany included)

Olympus Trip

Exa IIa

Exa IIA front view

lens: Meyer Domiplan

focal length:  50mm

apertures: 2.8 to 22 in 1/2 stops

focus range: 0.75m to infinity

lens fitting: Exakta bayonet

shutter: vertical cloth focal plane

speeds: 2, 4, 8, 30, 60, 125, 250

flash: bulb or electronic

film size: 35 mm

Externally, this is very like the Exa Ia and exactly like the Exa 500; it has the usual Exakta trapezoidal shape.  The layout on the front fascia is the same - shutter release on the left at the top, PC connector on the right at the top.  The lens fitting is the standard Exakta double bayonet (an internal bayonet for short focal length lenses and a larger external bayonet for longer focal length lenses).

A PDF manual is available on my Google Drive

There are differences, however.  The IIa has a fixed pentaprism and eye-level viewfinder with a Fresnal focussing screen with a split-image centre.  The shutter is now a vertically running cloth focal plane shutter rather than the strange mirror shutter of the Ia.  Along with the more standard shutter comes a larger range of shutter speeds  - eight speeds with the fastest  now being 1/250 seconds.

The removable back/base is exactly the same as is the shutter lock on the left of the viewfinder.   Another change is that the rewind knob is now a fold-out crank.

Exa IIa, rear view

With a vertical focal plane shutter, it should have been possible to increase the flash synchronisation  speeds but they are rather slow - 1/15 for bulbs or 1/30 for electronic flash.  The fact that bulb flash needs a slowest synch speed suggests that the only synch available is as the first shutter curtain ends its travel, bulb synch relying on the shutter being still fully open when the flash bulb reaches full intensity.

The Exa IIa came with a Meyer Domiplan lens rather than the Carl Zeiss Tessar that was standard with the Exa Ia.  I have yet to see the results from this lens but it has the reputation of delivering good results when stopped down.

This lens, like the Tessar, automatically stops down the aperture when the shutter release is pressed.  Exa lenses manage this by means of a lug on the lens barrel that covers the shutter release on the camera body.  The shutter is activated by pressing this lug which in turn presses the shutter release.

On the Domiplan lens, this lug is hinged and so presses the shutter release through an arc.  Because the release is not pressed straight in it can cause internal damage to the release mechanism.  This is made worse if the lug does not exactly line up with the shutter release so that it presses on one side of the release button.

shutter release lugs - Domiplan on left, Tessar on right

There is a further fault with the Domiplan.  As mentioned above, the release lug is hinged and this hinge dries out with time.  When the lubricant has dried out, the lug will not always return to its rest position after a photograph is taken.  This means that the aperture does not re-open to f2.8, leaving the viewfinder dark.  In use, this is easily remedied by flicking the lug with the shooting finger but it is annoying, nonetheless.  I have applied clock oil to this hinge and it is showing signs of freeing itself up.

4 February 2013:

Having run a test film through this camera, it is difficult to assess the camera's performance.  All the pictures ended up bright green.  This could not have  been down to the camera - it is an SLR and I would have seen the green through the viewfinder.

There are three possible causes for this green - defective development, defective film or defective scanning.  The staff in the lab assure me that mine is the only film to have come out green and so they do not think it was their development.

Defective scanning is a possibility but I would think it to be an automated process and if they have not changed any settings then the scanning process should not produce any colour cast.

The third possibility is a defective film.  The film I used was Agfaphoto Vista + 200 ISO, made under contract in Japan by, I think, Fuji-film.  Reputable makes of film should be reliable but in any factory process it is possible for the occasional item to escape the quality assurance system.

I am thinking that the reason for the green cast in my test film is the middle one - a defective scan - looking at the negatives, there is evidence of all three colours on the perforated rebate of the film (these are the frame numbers in magenta (the negative of green) and test lines in red and green (the negatives of cyan and yellow)) so it looks like at least part of the film has the requisite colour layers in the emulsion and the development has developed these correctly.  When I have time, I will scan the film myself to check the scan quality.

In addition to the green colour there are other problems which are definitely down to the camera.  At the bottom of each picture is a very over-exposed strip - this equates to the top of the film in the camera.  As the shutter travels vertically from bottom to top, this is most likely caused by the second shutter curtain hesitating slightly at the end of its travel.  This might cure itself with use which is quite common with 'stiff' mechanisms in old cameras.  I also need to be aware that I used this camera in sub-zero temperatures.  The lubricant in the shutter will be thicker at these temperatures and the shutter might well work better in warmer weather.

In general, looking at the negatives, the film has been exposed appropriately with good, but not excessive image density.

Some of the negatives are blank but this is down to operator error.  The shutter release is in the 'wrong' place.  Years of practise have taught me to be careful with the placing of my right hand when holding the camera.  With Exas I need to be careful with the placing of my left hand instead.  I also need to learn to use the shutter lock when not actually shooting.

This is my second Exa camera and my third roll of film on Exas.  That is enough to know that I like using Exa cameras with their various idiosyncrasies.  See further down for well exposed pictures from my second roll of film.

Witham by market Square

Lindum Terrace, Lincoln

Steep Hill, Lincoln

 I now have a test film with correct colours.  Nothing to complain about there,

Ihagee Exa 1a

Ihagee Exa 1a

Exa 1a, front view

This is a German SLR camera made by Ihagee of Dresden, Germany.  Ihagee (short for Industrie- und Handelsgesellschaft) was started in 1912 by a Dutchman in Germany.  Until the mid-1930s, Ihagee made more or less standard folding film cameras.  In 1933 they introduced the first Exakta, an SLR which used 127 film (the roll film equivalent of 35mm).  Using 127 film enabled them to make very small cameras.  In 1936 they introduced the Kine Exakta, an SLR which used motion picture (35mm) film (hence Kine).  The Exa range was a smaller and simpler version of the Exakta.

lens: Carl Zeiss Tessar
focal length: 50mm
apertures: 2.8 to 22
focus range: 0.5 m to infinity
lens fitting: Exakta bayonet
shutter: Exakta mirror shutter
speeds: 1/30, 1/60, 1/125, 1/175
flash: PC connector, bulb or electronic synch
film size:  35 mm

The Exa 1a was introduced in 1964 and was produced until 1977.  In some markets it was called Elbaflex 175, Exakta 100 or VX 100. The Exa II range were made concurrently with the EXA I range.  The camera can be dated by the origin engraved on the top plate.  This ranged from 'Ihagee Dresden' to 'aus Dresden', the Pentacon tower, to 'Dresden' to no engraving.  Mine has 'aus Dresden'.  The back of the camera has 'MADE IN GDR' stamped in the leatherette as well as '1' in a triangle.  The '1' in a triangle is a quality mark indicating the finished product is of the first quality.   (There were briefly two Ihagees - the original Dresden Ihagee in East Germany and a new Ihagee formed by the pre-war owner in West Germany - this camera was made in East Germany.)

This is an idiosyncratic  camera in some ways.  The camera is rather wide front to back (150 mm) in the middle and narrows at each end with the typical Exakta trapezoidal shape.  The shutter release is on the left side on the front and presses in rather than down.  The shutter release continues through a lug on the lens which shuts down the iris diaphragm just before the shutter is released.  The shutter itself is idiosyncratic  - it is neither an leaf shutter in the lens nor a focal plane shutter next to the film.  Rather, the mirror acts as the shutter in a way that I do not quite understand - but see here for details.  The viewfinder and pentaprism are removable, the focussing screen replaceable and the whole thing can be replaced with a waist-level finder.

Ihagee did not make lenses so the Exa 1a was supplied with various lenses. My Exa 1a has a Carl Zeiss Jena Tessar (as opposed to a Carl Zeiss Opton Tessar from West Germany) dating from 1970.  It is a f2.8 50mm lens with an Ihagee bayonet fitting.  Any Exakta or Exa lens should fit although I am told that long lenses (i.e. 100 mm) will cause vignetting.  There is an idiosyncratic aspect to the Ihagee bayonet - it is, in fact, two bayonets - one inside the mouth (for most lenses) and one outside the mouth for larger lenses.  The lens focusses from 0.5 m to infinity and has apertures from f2.8 to f22 available in 1/2 stop click positions.  As mentioned above, the shutter release acts through a lug on the lens and stops the lens down as it releases the shutter.

Shutter speeds are 1/30, 1/60, 1/125 and 1/175 (+ B).  Because of the way the mirror is used as the shutter, faster shutter speeds are not possible.  On the shutter speed dial there is a red dot for synchronising the shutter  for flash.  For electronic flash this is 1/60 seconds and for bulb flash it is 1/30 seconds but the actual setting is against a lightning icon for electronic flash and against a bulb icon for bulb flash.  There is a lever to the left of the viewfinder that will lock the shutter to prevent accidental exposures - a feature I wish more cameras would have.

There is no accessory shoe for a flash gun but grooves around the viewfinder eyepiece suggest that an optional shoe might have been available.  This does not matter to me - I never use flash - except I usually put a film type reminder in the accessory shoe to remind me that there is a film loaded and which type it is.

Exa 1a, top view

The film advance lever is rather small but moves the film on with one movement.  In the centre of the film advance is the frame counter   A wheel under the the film advance sets a reminder for the type of film in use - DIN, ASA, negative or reversal.

The viewfinder gives a 1:1 view of the scene and with the focussing screen supplied is clear and bright.  As is usual with a new old camera, near the end of my test film I am beginning to use the camera automatically.  I also have a waist-level viewfinder for this camera.

Waist-level finder, closed

The viewfinders snap out of position fairly easily when you want to change them (but are firmly held in place normally going on) and both the finder and the focussing screen can be replaced.  Both my focussing screens are plain ground glass.

Waist-level finder, open

 It is fairly easy to use from waist level but critical focussing is difficult from that distance.  Using zone focussing, this viewfinder is certainly ok for composing the shot and is much more discrete than holding the camera to your eye.  For critical focussing, there is a built-in magnifier but to use this, you need to raise the camera to face level and you then lose the advantage of having a waist-level finder - but still better than changing finders mid session, I would think.

Waist-level finder with magnifier

I think this camera will be a user if there are no shutter problems or light leaks.

15-12-2012:  

I have just bought a 2X teleconverter for this camera.  It cost me £7.00 including postage.  It was described on Ebay as a Pentax teleconverter and only attracted one bid - mine!  I could easily see it was an Exakta fit converter by the offset shutter release on the lens body - a feature that I have only ever seen on an Exakta (or Exa) camera lens.  It is excellent condition - there are no moving parts to go wrong - and just needed a good clean.

2X teleconverter, Exakta fit

 Unfortunately, I cleaned it with ROR lens cleaner and sprayed directly onto the glass instead of on to a tissue and I now have condensation between the lens elements.  I am thinking that if the moisture got in that easily, it will dry out again fairly easily. When it has dried out, I will try it and post the results here.

2X teleconverter, top view

12-1-2013: 

I now have my test film developed so here are some of the test pictures.  They disclose a slight fault as many of the pictures have a dark wedged shaped line at the top of the picture.  It is present on the negatives so is not down to the scanning.  I suspect the shutter is slightly out of line.  Bearing in mind that this camera has lain unused for many years before I bought it, I am hoping that the fault will rectify itself with the camera being used.

Lincoln High Street through the Stonebow

Lincoln Corn Exchange

River Idle at Gringley Carr

Lincoln High Street

19/07/2013

I now have finished my second film on this camera and the shutter is working fine.  Those black wedges have gone from the tops of the frames entirely.  Many old cameras that are a bit 'hesitant' just need to be used for a couple of films to be alright.

The Trent, viewed from the Nottingham-Lincoln train

Canal in Nottingham