Kodak Retina I (119)

I have purposefully been avoiding Kodak cameras. There are just too many of them and they are mostly towards the bottom end of the market. Kodak seems to have had an obsession with introducing new models - both camera and film. You would think that three or four film formats would suffice but Kodak introduced 36 different film sizes in roughly a century - a new format every eight years. Most of these were only slightly different from each other - sometime only the spool differed not the film, as with 120 and 620. Kodak were the same with their cameras.

Kodak Retina I (119)

However, the Retinas are special. Firstly, they were not designed by Kodak. When Kodak wanted to break into the serious amateur market they bought a German camera manufacturer (Nagel Kamerawerk) and had the good sense to keep Dr Nagal on as the chief designer. Retinas were made from 1934 to 1969 in Germany and this model (Retina I 119) was made from 1936 to 1938. I have used serial numbers to try and get a more precise date of manufacture. The lens was made between September 1935 and May 1936 according to my Schneider serial number list and was engraved with a serial number on 8 January 1936 according to Dave Jentz of the Historical Society for Retina Cameras. The shutter was made between 1935 and 1939 and the serial number is towards the end of that five year range so mid 1938 is my best guess. This means that the camera must have been made in 1938 and so one of the last model 119 to be made. More accurate records of serial numbers are not available from German companies - mostly because records were lost in the bombing in WWII. Dave Jentz has offered to more accurately date the camera body from the body serial number and when I have that information, I will update this blog with it.

This Retina I is very similar to good folding 120 cameras of the day (mid 1930s) and surprisingly similar to Zeiss Ikon's Ikonta 35 of 15 years later (it is also very similar to Balda's Baldina of a few years later).  Hubert Nerwin of Zeiss Ikon claimed to have spent the war years thinking about the design of the Ikonta 35 but I think he just had a quick shifty at a Retina.

Retina 1938

Ikonta 1949

The camera is made from a single aluminium alloy casting. It is covered with black leather (rather than leatherette) which, on this camera, is in excellent condition. The back has the word 'Retina' embossed in the leather in italic script. The exposed parts of the aluminium are enamelled in black. Kodak produced these cameras is twin series - the 119 (this camera) was enamelled in black and the 126 was chrome plated. Otherwise they were identical.

--------------------------------------------------------------------------------------------------------------------------------
Blog copyright by John Margetts, 2014
---------------------------------------------------------------------------------------------------------------------------------

Retina I (119) back view

The controls on the camera (as opposed to the shutter housing - details later) are nickel plated as is the hinge and catch for the back. As new, this will have looked very good - the soft-blueish nickel against shiny black. Unfortunately, the previous owner stored this camera in a damp place. The nickel plating has corroded leaving a blue/green deposit and some pitting of the metal. On the hinge and catch - both of which are steel - corrosion has allowed the under-laying metal to rust. This has ended with the hinge being rather stiff although it is already getting freer. The controls have cleaned up quite well with Brasso wadding with the exception of the knurled milling on the circumference of the film advance and film rewind knobs., although even those are now much improved.

The one part I find rather strange - finish wise - is the depth of field calculator on the base of the camera. This is made from steel - I would have expected brass on a camera this well designed - and the nickel plating has completely worn off from the edge exposing the steel which is now rusty.

So much for the cosmetics. The controls are what you need on a 35 mm camera. On the right hand end of the top is the film advance knob. Just below this is a clutch lever to allow the film advance to be disconnected for film rewind. Next to the film advance knob is a recessed frame counter. This is not connected to the film advance. Rather, when you press the small button to free the film advance to turn to the next frame, this button also advances the counter by one.

Slightly to the left of centre is the very small viewfinder. This is a reverse Galilean finder and too small to use while wearing glasses. On the left hand end is the rewind knob.

On the base are two items - a tripod boss (the modern standard 1/4 inch Whitworth thread) and a depth of field calculator together with the release button for the lens door. 

Retina I (119) - base of camera showing the focusing knob and aperture knob.

There is no connection between any of these controls and the shutter, so the camera can only advance the film one frame, so no wasted film, but cannot prevent double exposures.

This is a folding camera so the lens/shutter are hidden behind a door. This is released by a button on the base. A spring will open the door about halfway and the user has to open the door fully. The lens/shutter come forward on struts to their operational position. There is a short bellows which are made of lacquered cloth rather than leather - the more durable option. In this case they seem to be light proof but the test film will show for sure.

Retina I (119) lens door open

The lens and shutter are mounted on a square nickel plated plate which is much more attractive than the system used by Zeiss Ikon and Voigtlander. To close the lens door, you have to depress two studs - one on top and one below the square nickel plate. You also need to make sure the lens is focussed on infinity as there is insufficient clearance to close the door is the lens is focussed any nearer.

The lens is a Schneider-Kreuznach Xenar - a four element Tessar copy - which is not coated. Lens coating was around when this camera was made (1938) but was only used on really high end cameras. This lens was very dirty and did not come clean using ROR lens cleaner. As the lens is not coated an was very dirty I took the extreme step of cleaning the glass with Brasso wadding. This was both the external front face of the lens and the internal back face. The glass is now as good as new.

Retina I (119) -  close up of Xenar lens and Compur-Rapid shutter

The lens is mounted on the nickel plate as already mentioned and this means that the camera can be focused by moving the whole lens and not just the front element. this bodes well for image quality. Rather than turning the lens, there is a knob at the bottom of the shutter housing which moves over about 100 degrees to focus the lens. This is easily done by feel with the left hand. Kodak have thoughtfully provided two focus scales, one in black and one in red. The black scale is easily visible when using the camera in portrait mode and the red scale in landscape mode. I have never seen this before and it is very useful. Incidentally, the focusing scale is in feet.

The aperture is also adjusted by a knob at the bottom of the shutter housing and this can be distinguished from the focusing knob by feel. This also has two scales making this camera very easy to use. The aperture range is from f3.5 to f16 - a very usable range. I do not care about having a fast lens as I usually stop down to f8 or f11 and very rarely go as wide as f5.6.

Being a Compur shutter, the cocking lever moves clockwise  (down in this case as it is on the left). As with the focus and aperture scales, there are two shutter release buttons. Kodak have managed this is a very simple and effective way - there is a very short cable release screwed into the cable release socket - by very short, I mean 1 cm in length (see the picture above). I think this is intended to give a reachable shutter release for the right hand in both portrait and landscape positions but it also means there is a convenient release for a left handed person.

The Compur-Rapid shutter offers speeds to 1/500 seconds although received wisdom is that it is nearer to 1/350 in most cases. I have no way of checking and I do not really care - the 1/500 speed is useful and usable and that is what I care about.

Inside is fairly uncluttered. The film cassette goes on the left, there is a single sprocket at the top of the sprocket shaft and there is a fixed take-up spool. The camera's serial number is stamped into the metal of the door close to the hinge.

Retina I (119) inside view.

The only other thing to describe is the depth of field calculator on the base. This is quite simple to use. You rotate the outer ring until the distance you are focused on in against the central mark and then read off the furthest and nearest in-focus distances on the inner ring against the aperture you are using. To me, this is useful to find the hyperfocal distance of the lens at various apertures. To do this, align the infinity distance against the aperture you want to use and read the hyperfocal distance off the central mark - at f16, the hyperfocal distance is 13 feet, so I would focus at 13 feet and have everything between infinity and 8 feet in focus.

Depth of field calculator

Using the Camera (16-6-2014)

I have enjoyed using this camera with the trst film. I am still waiting for the lab to finish developing the film as I managed to get the leader oily by over-enthusiastic lubrication on the film advance mechanism - they wanted permission to sacrifice the first two frames to get an oil-free piece of film to attach to the developing machine.  I should get the processed film in the morning and I will update this essay with the pictures on Thursday, all being well.

The controls are, for the most part, ergonomically placed and easy to use. The one control I found difficult  nearly impossible to use is the aperture control. basically, this is too close to the focusing knob and it is too easy to move both accidentally. In practice, I found it easier to adjust the aperture by moving the pointer on the aperture scale.

What made this camera really easy to use is the provision of two shutter releases. Dr Nagel's intention, I am sure, was to make the camera as easy to use in portrait orientation as it is in landscape orientation. I found it easiest to fire the shutter left-handed even though I am essentially right-handed. For a left-handed person it must have been the best camera around by far.

The viewfinder is very small, as I mentioned above. It is the standard size for viewfinders from all manufacturers until the mid-1950s. It seems strange to me that it should be so. The folding viewfinders on my Zeiss Ikon and Agfa cameras are larger and easier to use and my Zeiss Ikon Icarette has a relatively enormous (glassless) 'sports' finder which is a large (6 x 9 cm) wire frame positioned at the lens' node  with a large enough frame as the eye-piece of the viewfinder. this move in the mid-1930s to enclosed reverse Galilean finders made the cameras significantly harder to use than their predecessors. having said that, the viewfinder is usable once I have removed my glasses - even if I have to compose by shape and line rather than by detail. Or is that an advantage - preventing me from being carried away by the detail?

The need to advance the frame counter before advancing the film soon became second nature and moving the clutch lever from Advance to Rewind before rewinding the film was obvious enough not to cause me any problems.

As I mentioned above, the camera had been stored in a damp place which has caused the cast aluminium body to corrode. An unexpected consequence of this was that, with very little handling, the leather covering came off the body. This was not a failure of the glue (almost certainly shellac) but the disintegration of the metal surface that the leather was glued to. This is not a problem - an application of emery paper to both camera and leather has allowed me to re-glue the leather (with modern plastic glue rather than shellac).

Test photographs:

(All copyright John Margetts)

As usual, these are all from around Lincoln. All the pghotographs are a bit on the bright sie (I have Gimped the version here) which suggests that the shutter is running a bit slow. The shutter is 76 years old so some speed variation is to be expected, perhaps, but the photographs are all exposed within the film's latitude so the camera is quite usable. 

The first picture (Silver Street, Lincoln) shows the effect of using a film in a dirty camera.  I did clean the inside of the camera before loading the film, but as you wind on the film, a very small amount of static electricity is generated - enough to attract any dirt inside the camera onto the film. It is visible in this picture as dark specks. Only this frame was affected.

First frame with statically attracted dirt.

Lincoln railway station

 This next picture has needed to be adjusted for parallax faults - the verticals were converging towards the top of the picture - a lens fault.

The Strait, Lincoln

Lincoln Exchequergate

Southern African buskers in Lincoln's St Benedict's Square

This next shows one of the very few bridges left in Europe with shops on them. In the Middle Ages, this was usual.

High Bridge, Lincoln.

Ikonta 520

This is a medium format camera (i.e. takes 120 film) from Zeiss Ikon.  It is a half-frame camera - 6 x 4.5 cm negative - which is half of a standard 120 frame of 6 x 9 cm. The body serial  number tells me it was made in 1932.

Ikonta 520, front view

lens: Novar

focal length:  75mm

apertures: f/6.3 to f/32

focus range: 4'6" to infinity (that is the scale, actually about 4 feet)

lens fitting: fixed

shutter: Derval

speeds: 1/25, 1/50, 1/100, B, T

flash: n/a

film size: 120

The body is made from cast aluminium.  This body casting is shared between the Ikonta 520, Bob 510 and Nettar 515. It is quite hard to understand why Zeiss Ikon shared the body between three different camera lines instead of calling them all Ikonta (the oldest name) seeing as Bob, Ikonta and Nettar all come with a range of lenses and shutters and can be considered to be one range in effect if not in name.

So, this Ikonta.  It is an Ikonta 520 - more specifically, a 520E. The other variants are
520IT with a f4.5 Novar and a Telma shutter,
520F with a F3.5 Novar and a Compur Rapid shutter and
520L with a f3.5 Tessar and Compur Rapid shutter.

The lens is a Novar which is a triplet and performs surprisingly well once stopped down to f/8 or smaller.  Ikontas were also available with Tessars at a higher price and wider aperture Novars.  The Novar on this camera is quite a slow lens with a maximum aperture of f/6.3.  The focussing is front cell only, rather than the whole lens moving (giving not quite so good image quality) and the focussing scale is in feet indicating that the camera is an official import into the UK.

The shutter is an everset Derval (everset means it does not need cocking before firing as a Klio or Compur would).  This is a fairly crude (and so cheap) shutter with two blades only and only offers three speeds: 1/25, 1/50 and 1/100.  With a slow lens like this camera has, faster shutter speeds would have been superfluous, particularly with the slow, by modern standards, films available in the 1930s.

Detail of rim-set shutter adjuster on Derval shutter

The shutter is a dial set shutter which means that the speed adjustment is by a dial set above the shutter housing.  More modern shutters have a rim set adjuster which is a ring around the shutter housing.  This shutter does not have a V (=Vorlaufwerk) setting for delayed action and as is usual with cameras made before the late 1940s, there is no flash connection or synchronisation.

Ikonta 520, side view

As I mentioned, the maximum aperture is rather small at f/6.3 but the minimum aperture is surprisingly small - f/32 - so the range of exposures possible is still respectably large.

A standard photograph with this camera (as with the Bob 510 and Nettar 515) is in portrait format and in this orientation the shutter release is underneath the camera and is uncomfortable to use.  To take landscape pictures, the camera must be used on its side and the shutter release is on the side and easy to use.

The viewfinder is the cheap two frame style of viewfinder - a Newtonian finder.

This was an expensive camera in its day - according to Tubbs (Zeiss Ikon Cameras 1926 -39, published by Hove Camera Foto Books), it cost £4/10/0 new in the early 1930s and advertised by Zeiss Ikon in the British Journal Almanac for 1936 at £4/17/6.  That is £4.50 in new money but a week's wages for a working man would have been around £1/10/0 or £1.50. So this camera cost around a months income for a working man which is around £1,000 in today's money.

19/07/20123:  I have now finished my test film for this camera and the results are not good.  The lens is susceptible to flare (as I would expect on a lens from 1930 - coating of lenses had not been invented yet) and some of the flare is very strange, suggesting something other than ordinary flare - a glass defect, perhaps.

Blues festival in Lincoln Arboretum

One of our many buskers in Lincoln - very young but quite accomplished

Lincoln Corn Exchange in the Cornhill

Comparison between Ikonta 520, Bob 510 and Nettar 515:

These three cameras from Zeiss Ikon share the same aluminium casting for their bodies.  This makes them very similar cameras.  They all take 120 film and they all produce half-frame negatives of 6 x 4.5 cm.  The details, however, are different.  I shall give the differences between them one model at a time, starting with the oldest.

Ikonta 520

This camera was produced from 1931 and is using the old fashioned dial set shutter - the disc at the top with the word 'Derval' on it..  The adjuster for the aperture is at the bottom of the shutter housing and requires the user to turn the camera around so that the scale can be seen.  The lens is a Novar triplet lens.  There is also a leather hand strap on this camera and the catch to close the back is solid.

Bob 510

Next is the Bob 510 (sold in the UK as a Nettar 510).  This is a slightly later camera first produced in 1934 and has a more modern rim set shutter - the dial is now replaced with a ring around the shutter housing.  Shutter speeds and apertures are the same, but the aperture adjuster is now on top of the shutter housing, behind the speed selector.  This means that the user can adjust the aperture with the camera pointing at the subject.  Perhaps not a major advance  but will have been less frustrating to use.  The lens is now a Nettar rather than the Novar - still a triplet but a different design.  There is no hand strap on this camera and the catch for the back is less secure than on the Ikonta

Nettar 515

Last is the Nettar 515.  This is later again, 1937, and also has the rim set shutter.  The shutter is now a Klio (on non-Zeiss Ikon cameras known as Prontor) with more shutter speeds (up to 1/175 and a few slow speeds).  The aperture adjuster is still on top, behind the speed adjuster, and there is now a delay setting lever below the shutter housing.  As with the Ikonta, the lens is a Novar triplet.  This shutter requires cocking before use  and there is an ancillary shutter release button on the camera body.  There is also provision to fit an optional brilliant finder on this camera although mine does not have this.  This model also has no hand strap and it has the same catch as the Bob 510

All three together, oldest on the left, newest on the right.

Exa 500

This is my fourth Ihagee camera and my third Exa.  The original Exa was a cut-down low-cost version of the Exakta and then the Exa line developed in its own right.

Exa 500 - front view

The Exa 500 is the end of the line for Exa cameras  and was developed after Ihagee was subsumed into VEB Pentacon, the state camera manufacturer.  The lineage from the Exakta is apparent in the shape.  This camera still has the rhomboidal shape introduced with the original 127 format Exakta in 1933.  It also still has the shutter release on the left, although the film advance is now on the right.  Another change is the fixed pentaprism viewfinder, so I cannot use the delightful waist level finder with this camera.

The immediate predecessor of this camera was the Exa II.  The body of the Exa IIa and this Exa 500 are identical although there are some internal differences.

Exa 500 - top view showing rhomboidal shape

The Exa 500 has a vertical cloth focal plane shutter which travels from bottom to top.  This shutter provides speeds from 1/2 to 1/500 seconds plus B.  This means it is twice as fast as the Exa II.  There are two flash settings: 1/60 for electronic flash and 1/15 for flash bulbs. This camera follows the Exa standard and flash synch is achieved by aligning a dot on the speed dial with either a zigzag icon or a bulb icon.  On the front of the body is a single PC connector.

This camera also has a shutter lock beside the viewfinder - cover the red dot to shoot, uncover to store the camera.  The only other real change between the Exa II and the Exa 500 is that the Exa 500 has an instant return mirror so the viewfinder does not go blank when you fire a shot.

Like other Exakta/Exa cameras, the film take-up spool is removable and can be replaced with an empty film cassette.  Doing this obviates the need to rewind the film but it does cost you one frame of film.  There is no internal knife to cut the film like the Exaktas have so this must be done after opening the back.  The only real advantage of this is the possibility of developing half a roll of film but I cannot imaging that many people have ever bothered.

The film advance is on the right as is normal in non-Ihagee cameras.  It has quite a short stroke of just over 90 degrees (compared to the Exakta Varex II where the advance travels about 300 degrees).

The back of these cameras come away from the camera body in one piece with the base.  This is supposed to make it easier to load film but I find this method harder.

Exa 500 - inside and the separated back  and take-up spool

Exa cameras were supplied with a variety of lenses depending on how much the customer wanted to pay.  This camera has a Meyer-Optik Domiplan. This is a triplet design so not as good as the Tessar option, but the Domiplan performs well enough when stopped down.  The lens is a semi-automatic lens - the diaphragm closes when the shutter release is pressed but stays open for composition and focussing.

The Domiplan achieves this automation by a hinged lug that protrudes over the shutter release - the photographer presses this lug which in turn presses the shutter release.

This mechanism in the Domiplan lens has a weak link that is prone to seizing but this particular lens performs OK.  My other Domiplan lens needed the mechanism cleaning with naphtha before it would work satisfactorily.

This camera would also work with my Exa fit Carl Zeiss Jena Tessar (we need to specify Carl Zeiss Jena in contradiction to Carl Zeiss Opton, the new (at the time) Carl Zeiss operation in West Germany.  East German Carl Zeiss Jena lenses are generally better than Carl Zeiss Opton lenses).

In use, this camera is much as you would expect.  The shutter speed selector is rather loose and I was not sure I was actually selecting any speed, but I tried exposures at various shutter speeds and they have all come out well exposed so the shutter speed selector must be doing its job.

There is a red flag in the viewfinder to tell you that you need to advance the film before taking the next shot.  In previous Exa cameras this was not necessary as the mirror would only return to the viewing position when you had wound on.  In this model, the mirror is an instant return mirror and it would seem that the makers thought users might get confused with such sophistication, hence the red flag.

The camera is light-proof (not a given with old cameras) and the shutter is moving smoothly.

Here are some sample photographs from my test film:

Ihagee Exakta Varex IIb

This is one of Ihagee's 'serious' cameras.  It is very similar to the two Exas I already own but has more facilities and is built to a higher standard.  It is the usual Exakta/Exa rhomboidal shape.  On my two Exa cameras, the back and base come away as one to allow film loading.  The Varex IIb is more traditional with a hinged back.  This back, however, is also removable if you want.

lens: none
focal length:  n/a
apertures: n/a
focus range: n/a
lens fitting: Exakta double bayonet
shutter: horizontal cloth focal plane
speeds: 12 seconds to 1/1000 seconds
flash: three PC connectors, no accessory shoe
film size:  35mm

Exakta Varex IIb with lens and viewfinder added

The camera is heavy, weighing 581g without lens or viewfinder.  It is left-handed.  The film advance is on the left as is the shutter release and one of the two (yes, two) shutter speed selectors.

This camera came without a lens and has both (yes, both) the Exakta bayonet mounts so this camera will take any Exakta fit lens.  Strictly, this is a Varex IIa type bayonet as it has slots at the inner bayonet flanges (not sure why).

Exakta Varex IIb as I bought it

The reason for having two bayonet mounts on one camera is that the original mount restricted the width of attached lenses.  When Ihagee developed telephoto lenses, there was too much vignetting of the image to be usable. The new bayonet mount has a wider diameter and so allows wider lenses to be fitted.  (note: I am using the word 'wider' in a mechanical sense, not in its other, optical, sense.)

The shutter release is beside the lens mount to allow the use of automatic lenses.  In the Exakta system, the lens has a secondary shutter release which fits over the camera's shutter release.  When you press the lens' secondary release, the lens diaphragm closes and the primary release is pressed, actuating the shutter.

The shutter is a horizontal cloth focal plane shutter.  On this particular specimen, the shutter is faulty.  The mechanism sounds dry (there is a faint but clear squeal when the shutter actuates), the second curtain is significantly wrinkled and, at the slower speeds, the second curtain doesn't quite close.  At 1/1000, it works fine.

This is the only camera I have seen that has two speed selectors.  On the left is a small conventional selector that covers speeds from 1/30 to 1/1000 plus B and T.  This works in a fairly conventional manner - lift, turn to the required speed and release.

slow speed selector

fast speed selector

On the right of the camera is another speed selector which covers speeds from 1/8 to 12 seconds.  These figures are in black.  This selector also provides a delay of up to six seconds (using the figures in red).  When using the delay, you also get mirror lock up so reduced vibration can be achieved when using the macro attachment - a facility that no other of my SLRs has until my Canon EOS of 1995.  In the centre of the slow speed selector there is a film speed reminder dial.  As this camera is totally manual, this dial does nothing except remind you what film you have loaded into the camera.

Another quirky thing about Exakta cameras is the film advance lever.  This moves through over 300 degrees which is more than you can do in one motion.  I am actually finding this ok but I start the motion with my left thumb for the first half of the travel and then my left index finger takes over.  Around the film advance lever there is a frame counter.  This counts up from zero - so tells you how many frames you have shot.  It is also quirky as the frame count changes when you press the shutter release rather than when you advance the film.

Exakta cameras have exchangeable viewfinders.  When I bought this camera, there was no viewfinder with it, just a rectangular hole in the top plate.  I have two viewfinders for my Exa cameras and these fit this camera so I have a choice of an eye-level finder and a waist level finder.

Hole in the top plate for fitting the viewfinder

Moving to the front of the camera, there is little to note.  As I have mentioned, there is a double bayonet mount and a shutter release.  There are also three (yes, three) PC connectors for a flash gun.  Ihagee seem to have tried to be as idiosyncratic as possible with their cameras.  Rather than go down the route used by Prontor and Compur (hence PC) and have a switch to select between bulb and electronic flash, Ihagee have provided separate connectors , one for electronic flash and two for flash bulbs.

In fact, the three PC connectors can be used in various ways to allow different shutter speeds.  Using the X connector and a shutter speed of 1/60 allows use of electronic flash.  Using the FP (Focal Plane) connector allows shutter speeds up to 1/1000 seconds which is an incredibly fast shutter speed for flash.  The manual gives guide numbers for different bulbs and shutter speeds - the fast speeds being achieved because the flashbulbs suitable for the FP connector have a flash duration of around 1/40 second and so are burning throughout the expossure.  The F (Fast) connector allows small fast flashbulbs to be used with a shutter speed of 1/30.  The X (Electronic) connector can also be used with a shutter speed of 1/8 with any flashbulb.  I am not sure how much advantage is given to the photographer with the above choices, but I almost never use flash and have never used flashbulbs, so I am likely to be missing the point.

Underneath the camera are four knobs.  The smallest of these unscrews to allow the use of an internal knife to cut the film when an empty cassette is used in place of the take-up spool.  Next to this is the rewind knob with a small folding crank.  At the other end of the camera is a knob which is pulled away from the camera to release the catch on the back.  Between these two knobs is the tripod boss which is the standard 1/4 Whitworth tread.

Base of camera

The outside of the back has two small chrome rectangles and one large chrome rectangle.  These are the fitting for internal components, the small rectangles help to keep the film flat and the large rectangle is part of the fitting of the pressure plate.

Rear of camera

The camera in use:

I am trying out this camera (despite having a faulty shutter) with a roll of out-of-date and no longer made film - Kodak Plus X.  I have never used this film before but it had a very good reputation.  This film is monochrome and is rated at 125 ASA/22 DIN.  I don't know why but it seemed appropriate to try this camera with a vintage monochrome film.

The camera set-up I am using is the Varex IIb body, Carl Zeiss Jena Tessar (50mm and f2.8) and a waist-level viewfinder with a plain focussing screen.  [This lens should not be confused with a Carl Zeiss Opton Tessar from West Germany.  The Carl Zeiss Jena lens is the real thing.]

There are many options available for this camera for both lens and finder.  I have the Carl Zeiss Jena Tessar and two Meyer-Optik Domiplan lenses available and the waist-level finder and a pentaprism eye-level finder.  I am enjoying the waist-level finder but must admit to struggling a bit with the reverse action when I move the camera.

First aspect of the waist-level finder is the fact that the image is reversed left-to-right.  If you want to move the image to the right, you need to move the camera to the left.

It is also easy to get verticals at an angle.  Again, you have to move the camera the 'wrong' way to correct this.

This finder has a plain focussing screen which makes focussing a bit harder.  For me, this is not a significant problem as I usually use hyperfocal focussing.  On the rare occasions when I rely on critical focussing, there is a hinged magnifier available which is more than I shall ever need.  If not, other focussing screens are available with micro-prisms and split-image centres.

I have been carrying this camera around for about an hour this afternoon and I can confirm that this is a heavy camera.  There are strap lugs with split rings available to connect a strap.  A nice touch is the presence of triangular leather patches behind the split rings to stop the rings and strap ends from scratching the camera body.  While I have a number of straps available, I have not fitted one to this camera.

Contrary to my usual practice, I am using a shutter-priority exposure system, adjusting the aperture to vary the exposure.  The reason I am doing this is because this ('faulty') shutter seems to perform best at 1/125 seconds so I am keeping it set at this speed.

What I am finding, which delights me, is that I am seeing the image in the wauist-level finder as a picture rather than as a view.  This is making composition not so much easier (see my comments about image reversal) but clearer and more precise.  So far I much prefer it.

I am also finding the left-hand operation surprisingly easy.  I am no longer pressing the slow speed selector hoping to fire the shutter.  The film advance with its 300 degree travel is also surprisingly easy to use left handed.

As I have already said, I usually use hyperfocal focussing but if I did not I think I would find right-handed focussing cumbersome.

My first film being completed, I need to develop the film and scan it.  Then I shall post some sample pictures here.

Film is now developed and scanned.  Here are some example pictures, clearly showing the problem with the shutter is one of them.  The rest are not too bad (if you ignore my poor scanning ability!).

Serial numbers to help with dating cameras.

This is information that I have collected over the last few years from a number of sources.  Some of those sources contradict each other so I have had to make decisions as to what I wish to keep.  I cannot guarantee its accuracy.

The date a lens or shutter is made is not always the date the camera was made.  Both lenses and shutters are made and sold to camera manufacturers in batches.  A camera made in one year may have a lens made the previous year.  I have at least one camera (Zeiss Ikon Icarette) when the shutter was made the year before the lens.  It is also possible that either the shutter or the lens is a later addition made by a repairer.

Here are the links to the files:

Voigtlander lenses

Schneider lenses

Compur shutters

Carl Zeiss lenses (East and West Germany included)

Olympus Trip

Zeiss Ikon Voigtlander Vitessa 100 SR

This camera outlines the dangers of buying online.  One is reliant on the written description given by the seller and a photo or two.  Unfortunately, it is just not possible to physically examine what you are buying.

In this case, the camera was described as 'good and clean' with the seller saying that they knew nothing about cameras and so could not comment on functionality.  That last should have been a red flag to me - anyone can press the shutter release and tell if anything happens or not.  Similarly, other controls either turn, press or not and any seller can report such.

This camera is missing the battery cover which is blindingly obvious on even a cursory examination of the underside of the camera.  Less obvious but still well visible is the loose leatherette on the top (not visible in the picture supplied on Ebay) which covers two holes from which the screws have been removed.  Clearly, someone has attempted to take this camera apart.  The seller?  Or did the seller buy it in this condition and try to pass their mistake on?  I cannot know which but a small honesty on the part of the seller would have saved me buying an unusable camera.

I could have taken this up with Ebay but the cost to me was less than £10.00 including postage so it is not a major issue.  I just do not like people being dishonest with me and they now have a negative feedback for their troubles.

As to the camera itself, there is much to admire.  This model is one of the last engineered German cameras - Leica excepted - before Japanese plastic took over the world.  I don't mean that in a derogatory way as Japanese plastic has much to recommend it if only in weight.

This camera is heavy and you are not going to forget that you are carrying it.  The three main controls are easy to find by feel - at this time Zeiss Ikon had taken to putting plastic tabs on the focussing ring, aperture ring and shutter speed ring.

The aperture ring is between the other two and has the widest tabs.  The shutter speed ring is closest to the camera body and has tabs that extend to less than half the circumference of the ring.  The focussing ring is at the front and has only a small tab at the bottom below the lens.

This set-up means that it is easy to find the correct control by feel - the values are repeated in the viewfinder with a rangefinder spot in the centre for focussing.

The rangefinder is the worst aspect of this camera - the rangefinder spot is fairly small and quite faint.  It works fine but could be easier to use.

Exa IIa

Exa IIA front view

lens: Meyer Domiplan

focal length:  50mm

apertures: 2.8 to 22 in 1/2 stops

focus range: 0.75m to infinity

lens fitting: Exakta bayonet

shutter: vertical cloth focal plane

speeds: 2, 4, 8, 30, 60, 125, 250

flash: bulb or electronic

film size: 35 mm

Externally, this is very like the Exa Ia and exactly like the Exa 500; it has the usual Exakta trapezoidal shape.  The layout on the front fascia is the same - shutter release on the left at the top, PC connector on the right at the top.  The lens fitting is the standard Exakta double bayonet (an internal bayonet for short focal length lenses and a larger external bayonet for longer focal length lenses).

A PDF manual is available on my Google Drive

There are differences, however.  The IIa has a fixed pentaprism and eye-level viewfinder with a Fresnal focussing screen with a split-image centre.  The shutter is now a vertically running cloth focal plane shutter rather than the strange mirror shutter of the Ia.  Along with the more standard shutter comes a larger range of shutter speeds  - eight speeds with the fastest  now being 1/250 seconds.

The removable back/base is exactly the same as is the shutter lock on the left of the viewfinder.   Another change is that the rewind knob is now a fold-out crank.

Exa IIa, rear view

With a vertical focal plane shutter, it should have been possible to increase the flash synchronisation  speeds but they are rather slow - 1/15 for bulbs or 1/30 for electronic flash.  The fact that bulb flash needs a slowest synch speed suggests that the only synch available is as the first shutter curtain ends its travel, bulb synch relying on the shutter being still fully open when the flash bulb reaches full intensity.

The Exa IIa came with a Meyer Domiplan lens rather than the Carl Zeiss Tessar that was standard with the Exa Ia.  I have yet to see the results from this lens but it has the reputation of delivering good results when stopped down.

This lens, like the Tessar, automatically stops down the aperture when the shutter release is pressed.  Exa lenses manage this by means of a lug on the lens barrel that covers the shutter release on the camera body.  The shutter is activated by pressing this lug which in turn presses the shutter release.

On the Domiplan lens, this lug is hinged and so presses the shutter release through an arc.  Because the release is not pressed straight in it can cause internal damage to the release mechanism.  This is made worse if the lug does not exactly line up with the shutter release so that it presses on one side of the release button.

shutter release lugs - Domiplan on left, Tessar on right

There is a further fault with the Domiplan.  As mentioned above, the release lug is hinged and this hinge dries out with time.  When the lubricant has dried out, the lug will not always return to its rest position after a photograph is taken.  This means that the aperture does not re-open to f2.8, leaving the viewfinder dark.  In use, this is easily remedied by flicking the lug with the shooting finger but it is annoying, nonetheless.  I have applied clock oil to this hinge and it is showing signs of freeing itself up.

4 February 2013:

Having run a test film through this camera, it is difficult to assess the camera's performance.  All the pictures ended up bright green.  This could not have  been down to the camera - it is an SLR and I would have seen the green through the viewfinder.

There are three possible causes for this green - defective development, defective film or defective scanning.  The staff in the lab assure me that mine is the only film to have come out green and so they do not think it was their development.

Defective scanning is a possibility but I would think it to be an automated process and if they have not changed any settings then the scanning process should not produce any colour cast.

The third possibility is a defective film.  The film I used was Agfaphoto Vista + 200 ISO, made under contract in Japan by, I think, Fuji-film.  Reputable makes of film should be reliable but in any factory process it is possible for the occasional item to escape the quality assurance system.

I am thinking that the reason for the green cast in my test film is the middle one - a defective scan - looking at the negatives, there is evidence of all three colours on the perforated rebate of the film (these are the frame numbers in magenta (the negative of green) and test lines in red and green (the negatives of cyan and yellow)) so it looks like at least part of the film has the requisite colour layers in the emulsion and the development has developed these correctly.  When I have time, I will scan the film myself to check the scan quality.

In addition to the green colour there are other problems which are definitely down to the camera.  At the bottom of each picture is a very over-exposed strip - this equates to the top of the film in the camera.  As the shutter travels vertically from bottom to top, this is most likely caused by the second shutter curtain hesitating slightly at the end of its travel.  This might cure itself with use which is quite common with 'stiff' mechanisms in old cameras.  I also need to be aware that I used this camera in sub-zero temperatures.  The lubricant in the shutter will be thicker at these temperatures and the shutter might well work better in warmer weather.

In general, looking at the negatives, the film has been exposed appropriately with good, but not excessive image density.

Some of the negatives are blank but this is down to operator error.  The shutter release is in the 'wrong' place.  Years of practise have taught me to be careful with the placing of my right hand when holding the camera.  With Exas I need to be careful with the placing of my left hand instead.  I also need to learn to use the shutter lock when not actually shooting.

This is my second Exa camera and my third roll of film on Exas.  That is enough to know that I like using Exa cameras with their various idiosyncrasies.  See further down for well exposed pictures from my second roll of film.

Witham by market Square

Lindum Terrace, Lincoln

Steep Hill, Lincoln

 I now have a test film with correct colours.  Nothing to complain about there,