Monday 17 October 2011

Zeiss Ikon Ikoflex

Zeiss Ikon Ikoflex II
Zeiss Ikoflex II

Zeiss Ikon Ikoflexes are close copies of Rolleiflexes.  For some reason, they do not have the good reputation of the Rolleiflexes even though they use the same lenses and shutters - both, incidentally, made by Zeiss subsidiaries.

 My specimen is an Ikoflex II and has a lens serial number that dates from mid 1936 and a shutter serial number that dates from late 1936.  The camera has a focussing lever rather than knob - this was changed to a knob in 1937.  Together, this suggest a date for my camera of late 1936 to early 1937.   My specimen has a serial number of B17187 - this is found on the base just under the tripod thread.  I am told by the Zeiss Ikon Collectors group that the B serial numbers date from 1936 so I am confident that this camera body was made in 1936 although it is possible that the body, lens and shutter were put together in 1937.

The picture lens in my camera is a Carl Zeiss Jena Tessar f3.5, 7.5cm focal length and the focussing lens a Terona Anastigmat also 7.5cm focal length (pre-WWII, Carl Zeiss lenses had their focal length stated in cm and after WWII in mm).  This picture lens is as good as pre-war lenses get and pretty much as good as lenses get altogether.  The shutter is a Compur-Rapid which has speeds down to 1/500 of a second.  That is as fast as we go with a leaf shutter - any faster and you need a focal plane shutter ( I am told by experts that the actual top speed reached by a Compur-Rapid was nearer to 1/300 than the nominal 1/500).  This shutter has neither flash synchronisation nor delayed action.

Focussing takes a bit of getting used to.  You look down onto a ground glass screen and the image is reversed left-to-right.  As you move the camera to refine the composition, the image moves in the opposite way to that of the camera and slight tilting of the camera will put all the verticals out of kilter.  On a more positive note, the viewing screen is large and there is a magnifier to magnify the central portion for critical focussing.  Focussing of the lens is carried out with a lever - this was replaced with a more conventional knob in 1937.  The focussing lever is actually quite easy to use and moves across a distance quadrant which allows you to read off the depth of field at any given aperture.

The aperture control is partially hidden by the focussing lens and the f16 and f22 settings are hard to see.  To offset this, the lens is a very fast lens for the time - f3.5 fully open.  With a range of speed of 1, 1/2, 1/5, 1/10, 1/25, 1/50, 1/100, 1/250 and 1/500 seconds as well as B and T together with apertures from f3.5 to f22, this camera can cope with dull weather and bright sunshine with both slow (ISO 50) and fast (ISO 400) films.  The one big drawback here is if you hold the camera too firmly (i.e. holding the front plate as well as the body) it is not possible to focus as the front plate with both lenses moves to and fro to achieve focus.

This camera is easy to use two handed.  The left hand both focusses and cocks the shutter while the right hand releases the shutter release.  After the picture is taken, the film needs to be wound on before the shutter can be set again.  One draw back here is that the film can easily be wound on too far, there is no 'stop' as the film is wound on far enough - something we 35mm photographers take for granted.  As well as the waist-level finder, there is also a direct vision finder.  The centre of the front plate of the waist-level finder can be pushed out of the way, and the picture composed through a small hole in the rear plate.  As this is direct vision, there is no reversing of the image, but it is also not possible to use this finder to focus the image.
Lincoln Arboretum

When loading the film, the film passes over a roller that "counts" the film.  When the first number appears in the red window, a small lever on the side resets the film counter to "1" and from then on, you must use the film counter and not the numbers in the red window.  If you forget and use the numbers in the red window, you will get eight negatives only with large gaps between them - the series of numbers used are for 6 x 9 cm negatives.  This camera takes twelve pictures on a roll of 120 film (or BII as Zeiss Ikon call it.) - each negative being 6 cm x 6 cm.
Steep hill, Lincoln

There in one tripod bush on the base (there would be no point in having two bushes on a square format camera).  It is a standard 1/4 Whitworth bush.  This is unusual in my 1930s Zeiss Ikon cameras which usually have a 3/8 Whitworth bush with a removable 1/4 Whitworth insert.

Really, there is no a lot more to say about this camera.  It is not sophisticated (as later models in the range were) but has a good lens and a good shutter and as a result it takes excellent pictures.  What more do you want from a camera?

Main railway line, Lincoln

Zeiss Ikon Contina Ic

Zeiss Ikon Contina Ic
Not a lot I can say about this camera.  It is mid-range amateur - well above the Box Brownie and well below the likes of the Contaflex.  The standard of manufacture is what you would expect of Zeiss Ikon - solid, heavy, works well - perhaps a bit over-engineered. It was not cheap - the version with the Novar lens cost £29/7/- (in old money or £29.35 in new money). Given the average working man's weekly wage was £9 in 1957, this equates to around £1,500 in 2013 values.

This particular Contina is a model Ic although that was never Zeiss Ikon's designation.  It is distinguished from other Continas by 1) not being a folding camera and 2) not having a built-in exposure meter.  I also have an article on a Cortina IIa.

The viewfinder is a Galilean finder with bright-lines.  I find this awkward to use after using either an SLR or a camera with a crude frame finder as the finder shows much more than the image area.  It is necessary to remember to compose entirely within the bright-liners.  The finder is reasonably large and easy to use while wearing spectacles.

The top plate is uncluttered - the rewind knob, film type reminder, accessory shoe and combined film advance/frame counter/shutter release is all that is there.  The whole frame counter/shutter release assembly is depressed when the shutter is fired and it is possible to fire the shutter when setting the frame counter to zero (I did!).

On the front of the camera is a satin-chrome bezel with the lens sitting centrally.  The shutter is a Prontor SVS by Gauthier and uses exposure value settings.  With this system, you read an exposure value from a light meter (from 3 to 18) which sets a combination of shutter speed and aperture.  It is then possible to move the shutter speed ring to the desired shutter speed and the aperture will adjust itself to keep the exposure correct - or move the aperture ring and the shutter speed will adjust automatically.  It is not possible to move away from a "correct" speed/aperture combination without depressing the EV button.  This works in much the same way as the 'program' mode on a modern digital camera.  People either love or hate this system - I am the only person I know whom loves it - but it was in general use for many years so must have had general support.

There is what, at first sight, appears to be a second, useless range of shutter speeds.  These are in green and cannot be set.  "Then why have them?", I hear you ask.  Well, there is a reason.  In the case that the EV value is low, the usable speed/aperture combinations allowed will be small.  For an EV of 3, the speed/aperture combination is 1 second at f2.8 - and that is it.  If you want a smaller aperture, say f8, you read the necessary shutter speed of the green range opposite f8 (in this case eight seconds).  Now adjust the EV setting so that f8 is against the B setting on the speed ring.  This sets the aperture to f8 and allows the photographer to keep the shutter depressed for eight seconds.  Clearly, a tripod and shutter release cable are required for this, and the shutter speed is only as good as the photographer times it, but when you realise that the shutter manufacturers worked to a 20% margin on shutter speeds, timing the exposure to between seven and nine seconds will be fine and we should all be able to time that accurately.

The lens is a Zeiss Ikon Pantar f2.8, 45mm lens.  This is a triplet (three pieces of glass) rather than the Tessar's tetraplet structure, that focuses from about three feet  to infinity (the nearest marked distance  is four feet, but the lens moves well beyond that).

This lens has the usual Happy Snapper  settings - with this lens it is f8 and around twenty feet (both marked in red) which gives a depth of field of from nine feet to infinity.  If the lens is set to its smallest aperture (f22), the depth of field is from less than four feet to infinity.  As with all lenses, the largest and smallest apertures are best left alone and the lens will work best stopped down two or three stops - f5.6 and f8 in this case.

Film is rewound using a small knob on the left.  When this is turned to rewind then film, it automatically raises itself so it is above the level of the top plate.  When you have finished rewinding the film, you need to turn this knob one turm anti-clockwise to lower the knob again.  The only other thing to note is that this camera has a PC flash connector and can synchronise for bulb (M) or electronic (X) flash.  There is also a setting (V) for delayed action shutter release.

In use, the camera operates much as you might expect from Zeiss Ikon.  I have large hands and the camera is a bit small - the edge of the shutter housing is where I would like my fingers to be and the shutter release is a little too close to the right-hand edge of the camera.  I suppose this is unavoidable when making a small camera and it is far from the worst camera that I have, ergonomically speaking.

Some example pictures from this camera (note: these were scanned with my Canon flatbed film scanner - not the best scanner).

Busker with home-made 'instruments, Lincoln

Exchequergate, Cathedral Close, Lincoln

Mr Musicman, High Bridge, Lincoln.

Saturday 8 October 2011

Zeiss Ikon Tenax I

Zeiss Ikon Tenax I

This camera is unlike my other Zeiss Ikon cameras in that it was aimed at the middle of the amateur market - above the box Brownie brigade but below the Contaflex, Ikoflex, Ikonta market.  The Tenax I came out in 1938 (actually started retailing in early 1939) just after the Tenax II.  They are both named after the Goerz Tenaxes of 1909 and 1921 (Goerz being one of the camera companies that merged to form Zeiss Ikon in 1926).  You will frequently see these described as being made from 1930 to 1941, but that is due to a misprint in McKeowns and the correct dates are 1939 to 1941.  WWII meant that production was curtailed fairly soon after the launch and so these are fairly rare cameras.  My specimen is probably produced for the German home market rather than a British version as Zeiss Ikon usually produced British and American versions of their cameras with the distance scale marked in feet.  This camera has the distance scale in metres and, also, has the catch for the back marked Z and A (zu and auf - close and open) rather than in English.  Liberated by a British soldier in 1944/5, perhaps.

It is very small - just 110mm wide and 65mm tall and only 45mm thick.  This is not a folding camera but has a lens of 35mm focal length.  The camera uses such a short focal length lens because it produces a negative that is 24mm square - the 'normal' lens for any camera is the diagonal of the negative (or sensor for digital cameras).  For its size, it is remarkably heavy.  It is made of die cast aluminium and brass.  The brass is bright plated, but the way the plating has worn off the brass on the top plate and shutter fascia I suspect the plating is nickel.  My specimen is "well loved" - it has obviously been well used over a great deal of time.  Much of the textured leatherette on the front has worn smooth and significant plating has worn off .

It is an unusual camera in many ways.  There is no wind-on knob or lever on the top - the film is wound on using a combination film advance and shutter cocking lever that is pressed by the index finger of the left hand.  This film advance will move the film on one frame (24 mm) each time it is pressed and this is interlocked to the shutter release preventing wasted film.  The shutter release is on the front of the camera on the shutter as was becoming very unfashionable at the time this camera was designed.  It does, though, make the camera easy to use - if the shutter release was on the top plate as was becoming normal in the late 1930s, it would be hard to place the user's finger on it with such a small camera.  The shutter contains a double exposure lock - you cannot take a picture without winding on nor wind on without taking a picture.

The controls on the front are hard to use.  Apart from the stiffening we might expect on a camera that is 72 years old, the parts are quite small and my fingers quite large.  The aperture adjuster is very stiff and, even when holding the lens, the focus changes more than the aperture does. This is probably telling me to open the front and get some clock oil in there.

To open the camera to load a film or removed an exposed film, the circular button on the base has to be turned a quarter turn and then slid to one side.  This allows the base and back to be removed in one piece.  This is supposed to make loading the camera easier, but I find the take-up spool is liable to drop out as is the cassette of film.  This operation is made much easier by using a table top, but in the field, table tops can be hard to find.  The take-up spool I have is a later Contax plastic spool.  The original Tenax I spool was die-cast metal.

Inside the Tenax I - plus take-up spool

Removable back of Tenax I

The shutter is a Compur with speeds 1, 1/2, 1/5, 1/10, 1/256, 1/50, 1/100 and 1/300 seconds as well as B.  The aperture can range from f3.5 to f22 which is a good range for most photography.  There is a Happy Snapper setting of between f5.6 and f8 and a distance of 6 metres signified by red dots.

The lens is a Novar Anastigmat 35mm lens which is only 11mm across.  Focussing range is from 1 metre to infinity - at the Happy Snapper setting, from 3 metres to infinity should be in focus.

The mechanism was not particularly free running so I took the bull by the horns and took the top plate off.  Inside is fairly simple - not a lot for me to damage.  I have applied clock oil to all the pivots and linkages and the mechanism is working much better now.
Front view showing the plating having worn off.


28-9-2012:  

 Because this camera is idiosyncratic it takes a bit of getting used to.  The viewfinder is a standard size for the time but almost impossible to use wearing my glasses.  This is a point I find with most pre-1960 cameras.  The shutter release is not quite where my finger expects it to be but once I have started taking pictures it is fine.

The film advance is taking more getting used to - it is on the 'wrong' side of the camera and is a plunger rather than a knob or lever. Again, once I am using the camera it is fine.  In fact, the combination of the two levers on either side of the lens means you can take a couple of pictures per second which is not bad on an entirely manual camera.  Zeiss Ikon claimed it was capable of four frames per second but that would require a camera in smoother condition than mine and more nimble fingers than I have available.

The hardest part to use is the diaphragm setting.  It involves turning the centre of the lens mount - I suspect that the designer had smaller fingers than I have.  I am quite enjoying using this camera - it is definitely a pocket camera - compact and reasonably light (not compared to digital point-and-shoot cameras, but compared to metal film cameras in general).  I suspect that if the second world war had not happened just after this camera was designed, the two lever system of shutter release and film winder would have become normal.

This particular camera is suffering from 'Zeiss bumps'.  This is common on older Zeiss Ikon cameras and appears as small (two to four mm) bumps under the leatherette.  My Tenax has four large (four mm) bumps and two small (two mm) bumps.  These are caused by the rivets holding the components together reacting with the glue holding the leatherette on forming a local deposit of what I assume to be oxides.  They only occur on the back of my camera.

I could probably 'cure' this by removing the leatherette and cleaning the metal beneath and replacing the leatherette but I suspect I would do more harm than good.  The frame of the front element of the viewfinder is stamped '24x24' and '3.5 cm' - the first indicating the image size and the second the film size.

The shutter is covered by Zeiss Ikon's own fascia.  This hides the shutter serial number which would help to date this particular camera.  However, the body serial number is J78039.  This partly dates the camera as pre-1945 production was in three tranches each of 10,000 cameras.  The first tranche (1938-9) has serial number letters H, the second tranche J and the third tranche M.  So my camera dates from the second tranche which means it was made after 1938-9 and before 1945.  After 1945, eastern Zeiss Ikon continued with the production of the Tenax I, initially exactly the same as the wartime version and then with a Tessar lens.  However, this later production did not have serial numbers starting with a letter.


Some pictures taken with this Tenax I (not Photoshopped at all).  These pictures suffer from light bleed from the light areas into the darker areas.  It has been suggested to me that this is due to the poor quality glass that Zeiss Ikon had available during WWII.




Jews House, The Strait, Lincoln

Crooked House, Steep Hill, Lincoln